9 Sep
2004
9 Sep
'04
2:45 p.m.
Which to buy? I am looking at two different ones - The WTCPT which you
have to buy different tips to control temperature or the WES51 which has
adjustabel temperatur control and is a little cheaper.
I know either one would probably be a good investment but what is the
advantage of one over the other?
Thanks!,
Bryan Pope
9 Sep
9 Sep
4:27 p.m.
I use an old PS 2D from years back. it's temperature controlled by tip
exchange. and to be honest after years of use, i've only ever changed the
tip 3 times. (except for different types of "end").
I also have a newer weller (that's @ work - I forget what type) which is
temperature controlled by a knob on the front. and again I've never had a
problem wih it.
Personally I like the one with the knob for gadget rights, but either one
will be suitable. if you intend to do a lot of SMC work then I suggest the
one with the knob. however it's just as easy to change the tip :D
regards
charles
----- Original Message -----
From: "Bryan Pope" <bpope(a)wordstock.com>
To: <cctalk(a)classiccmp.org>
Sent: Thursday, September 09, 2004 8:45 PM
Subject: Weller Soldering Stations...
Which to buy? I am looking at two different ones - The WTCPT which you
have to buy different tips to control temperature or the WES51 which has
adjustabel temperatur control and is a little cheaper.
I know either one would probably be a good investment but what is the
advantage of one over the other?
Thanks!,
Bryan Pope
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.752 / Virus Database: 503 - Release Date: 05/09/2004
5:07 p.m.
>>>> "Bryan" == Bryan Pope
<bpope(a)wordstock.com> writes:
Bryan> Which to buy? I am looking at two different ones - The WTCPT
Bryan> which you have to buy different tips to control temperature or
Bryan> the WES51 which has adjustabel temperatur control and is a
Bryan> little cheaper.
Bryan> I know either one would probably be a good investment but what
Bryan> is the advantage of one over the other?
I have a WTCPS (predecessor of the WTCPT, same technology). It's an
excellent device.
Apart from my extra-big tip (which is the 800 F variant) all the
others are the standard 700 F. I've never run into a need for
variable temperature. Selectable tip size, yes, but that of course
requires a new tip either way.
paul
9:56 p.m.
I know either one would probably be a good investment
but what is the
advantage of one over the other?
I can't answer on the former, as I don't have that model. Fairly recently I
purchased a WES51. It's the nicest iron I've ever owned and I'm extremely
happy with it. I believe I paid $70 and some change for it, brand new.
I have also heard many folks touting metcal units. I suspect a used metcal
or new WES51 (hard to afford a new metcal I seem to recall) would serve
quite well. In this particular case, unlike most other efforts of mine
computing related, I would prefer a brand new unit.
Regards,
Jay West
10 Sep
10 Sep
8:55 a.m.
On Thursday 09 September 2004 2:45 pm, Bryan Pope wrote:
Which to buy? I am looking at two different ones -
The WTCPT which you
have to buy different tips to control temperature or the WES51 which has
adjustabel temperatur control and is a little cheaper.
I have a WES51, and I like it very much.
I know either one would probably be a good investment but what is the
advantage of one over the other?
Thanks!,
Bryan Pope
--
- Dan Wright
(dtwright(a)uiuc.edu)
(http://www.uiuc.edu/~dtwright)
"we are content if we can describe a multitude of other things in terms of...
fundamental incomprehensibilities. science is an activity that takes place on
the shore of an infinite sea of mystery."
chet raymo, "doctor seuss and doctor einstein"
7424
days inactive
7425
days old
4 comments
5 participants
participants (5)
-
bpope＠wordstock.com -
charlesb＠otcgaming.net -
dtwright＠uiuc.edu -
jwest＠classiccmp.org -
pkoning＠equallogic.com