11 Oct
2021
11 Oct
'21
11:52 a.m.
Due to family medical issues I have to downsize and move into a retirement facility at the
end of this month. The following are available for local pick up only in the Boston MA
metro west region. I can be reached off-list at john at forecast.name.
DEC VT180 with 4 floppy drives
Includes HSC Inc?s CO16 8086 coprocessor with 256KB memory
Full hardware documentation for the CO16
Documentation:
Bios User?s Guide
CP/M Operating System Manual
Multiplan Manuals
Microsoft M80/L80 Manua
MBasic VT180 v5.21 Reference manual
No software available. If/When I find the software I will make it available to whoever
takes this system.
Digital Research CP/M Plus distribution (includes 8? floppies)
Acorn RISC OS 3 Programmers Reference Manuals
Volumes 1 - 5 + Style Guide
(This does not appear to be available on Bitsavers)
Apple Inside Macintosh
Volumes 1 - 6
Quicktime components
Communications toolbox
Apple Resedit reference
Minix Software
Minix 1.5 for Macintosh (including disks)
Minix for the Atari ST
Minix Binaries and Sources for IBM PC/AT (5?? floppies)
Miscellaneous Macintosh Software (Pre MacOS)
At Ease
Kid Pix
Kid Pix Companion
SimEarth
Sim City
Sim Town
Sim City 2000
Sim City 2000 Scenarios - Vol 1 Great Disasters
Sim City Urban Renewal Kit
Microsoft Flight Simulator
Disk Doubler
Auto Doubler
Virtual
Hard Disk Toolkit
Reader Rabbit
Metrowerks CodeWarrior Bronze
Think C Version 5
Think Reference
Miscellaneous Macintosh Books (Pre MacOS)
The Apple Macintosh Book by Cary Lu
Hypercard Developers Guide
Miscellaneous Atari ST Software
Balance Of Power
Omnires Monitor
PC Ditto
Miscellaneous Atari ST Books
Atari ST Internals
Programmer?s Reference Guide
Other:
Atari 400/800 Disk Operating System Reference Manual
Atari 810 Disk Drive Operators Manual
15 Oct
15 Oct
6:10 p.m.
On Oct 11, 2021, at 11:52 AM, John Forecast via cctalk <cctalk at classiccmp.org>
wrote:
Due to family medical issues I have to downsize and
move into a retirement facility at the end of this month.
Oh no! I hope everything will be OK, and that you're not being forced to downsize
*too* much as part of this.
DEC VT180 with 4 floppy drives
Includes HSC Inc?s CO16 8086 coprocessor with 256KB memory
Full hardware documentation for the CO16
Documentation:
Bios User?s Guide
CP/M Operating System Manual
Multiplan Manuals
Microsoft M80/L80 Manua
MBasic VT180 v5.21 Reference manual
No software available. If/When I find the software I will make it available to whoever
takes this system.
If this is still available, I would pay for someone to pick this up, pack it, and ship it
to California. (I'd also send John money for it too, IMO it's only fair if I'm
paying someone to retrieve, pack, and ship it.)
Minix Software
Minix 1.5 for Macintosh (including disks)
Minix for the Atari ST
Minix Binaries and Sources for IBM PC/AT (5?? floppies)
If this is still available, I would **desperately** like to acquire all of the above.
Again, I'm willing to pay someone (and send money to John!) to pick this up, pack it,
and send it to me in California.
I have MacMinix 1.5, but a couple of my disks are bad, and I'd really like to have the
other Minix bits too. Literally simultaneously with John's sending of this email, I
was running the Mac IIfx in my office at Apple, and rebuilding all of MacMinix 1.5.10.7 at
-O2... Seriously! (Part of a personal project to port Minix 1.5.10.7 to a 68010 VME board
set.)
My first Open Source contribution was to MacMinix. I created a patch that flushed the
instruction and data cache on the 68040 when necessary (probably too often, in fact) so it
would run nice and fast on the Centris 610 that I upgraded to from a Mac IIci in late
1993.
In any case, if I don't get these myself, I hope they went to good homes, and I'd
absolutely love it if whoever got them could make and share disk images of the MacMinix
disks since right now the only publicly-surviving artifact is the StuffIt archive of an
installed system.
-- Chris
6:33 a.m.
Hi Jonathan,
I currently have no software for this (he might find it later).
I'm happy to pay for your trouble if you're willing to pass it along?
Thank you!
Todd
On 10/16/2021 9:10 AM, Jonathan Chapman via cctalk wrote:
> Includes
HSC Inc?s CO16 8086 coprocessor with 256KB memory
I think I've got software for
this, if it's not available elsewhere/included with the hardware.
Thanks,
Jonathan 
6:35 a.m.
Absolutely, I believe I already have ImageDisk images, but you're welcome to the
original 8" media as well. I'll take a look when I'm down at the building
today.
Thanks,
Jonathan
??????? Original Message ???????
On Saturday, October 16th, 2021 at 09:33, Todd Goodman via cctalk <cctalk at
classiccmp.org> wrote:
Hi Jonathan,
I currently have no software for this (he might find it later).
I'm happy to pay for your trouble if you're willing to pass it along?
Thank you!
Todd
On 10/16/2021 9:10 AM, Jonathan Chapman via cctalk wrote:
> > > Includes HSC Inc?s CO16 8086 coprocessor with 256KB memory
> > >
> > > I think I've got software for this, if it's not available
elsewhere/included with the hardware.
>
> Thanks,
>
> Jonathan
10:35 a.m.
Diskette images uploaded here:
ftp://filedump.glitchwrks.com/temp/hsc_8inch_images.tar.gz
Available on HTTP/HTTPS as well. Two of these were off factory originals.
Thanks,
Jonathan
??????? Original Message ???????
On Saturday, October 16th, 2021 at 09:35, Jonathan Chapman <lists at glitchwrks.com>
wrote:
Absolutely, I believe I already have ImageDisk images,
but you're welcome to the original 8" media as well. I'll take a look when
I'm down at the building today.
Thanks,
Jonathan
??????? Original Message ???????
On Saturday, October 16th, 2021 at 09:33, Todd Goodman via cctalk cctalk at
classiccmp.org wrote:
> Hi Jonathan,
>
> I currently have no software for this (he might find it later).
>
> I'm happy to pay for your trouble if you're willing to pass it along?
>
> Thank you!
>
> Todd
>
> On 10/16/2021 9:10 AM, Jonathan Chapman via cctalk wrote:
>
> > > > Includes HSC Inc?s CO16 8086 coprocessor with 256KB memory
> > > >
> > > > I think I've got software for this, if it's not available
elsewhere/included with the hardware.
> >
> > Thanks,
> >
> > Jonathan
946
days inactive
951
days old
5 comments
4 participants
participants (4)
-
cmhanson＠eschatologist.net -
john＠forecast.name -
lists＠glitchwrks.com -
tsg＠bonedaddy.net