22 Apr
2009
22 Apr
'09
7:39 p.m.
Does anyone here know where I could obtain a front panel frame for a
pdp11/70?
--
David Griffith
dgriffi at cs.csubak.edu
A: Because it fouls the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
22 Apr
22 Apr
11:12 p.m.
I think I have a few front panels left, including the RDC, but not sure of
the frames. Are they the same as an 11/40 or 11/45?
On Wed, Apr 22, 2009 at 6:39 PM, David Griffith <dgriffi at cs.csubak.edu>wrote:
Does anyone here know where I could obtain a front panel frame for a
pdp11/70?
--
David Griffith
dgriffi at cs.csubak.edu
A: Because it fouls the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
23 Apr
23 Apr
8:46 a.m.
I'm looking for a frame. They are the same for all of the
later 11s (e.g. 35, 40, 45, 55, 70).
Paul Anderson wrote:
I think I have a few front panels left, including the
RDC, but not sure of
the frames. Are they the same as an 11/40 or 11/45?
On Wed, Apr 22, 2009 at 6:39 PM, David Griffith <dgriffi at cs.csubak.edu>wrote:
Does anyone here know where I could obtain a
front panel frame for a
pdp11/70?
--
David Griffith
dgriffi at cs.csubak.edu
A: Because it fouls the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
9:14 a.m.
On Thu, Apr 23, 2009 at 8:46 AM, Tom Uban <uban at ubanproductions.com> wrote:
I'm looking for a frame. They are the same for all
of the
later 11s (e.g. 35, 40, 45, 55, 70).
Paul Anderson wrote:
> I think I have a few front panels left, including the RDC, but not sure of
> the frames. Are they the same as an 11/40 ?or 11/45?
Are the frames the same on an 11/70 for the RDM and the
lights-and-switches panel? They look the same to me in photos, but I
haven't seen both side-by-side. I ask because both of my 11/70s have
RDMs and I would like to put a lights-and-switches on at least one of
them. Jay West gave me a stripped front panel (no switches) some time
ago, so realistically, I need switches, toggles, and plexiglass to get
that one fully working, but I'd be happy to have lights and no
switches or switches with C&K paddles (which I already have).
Given the prices on intact panels, I'm probably going to shop for 2-3
imperfect panels and mix parts. I don't mind a bit of refurb work,
and from some research, panels with broken switches and such don't
fetch top dollar.
-ethan
10:06 a.m.
them. Jay West gave me a stripped front panel (no
switches) some time
ago, so realistically, I need switches, toggles, and plexiglass to get
that one fully working, but I'd be happy to have lights and no
switches or switches with C&K paddles (which I already have).
I've seen two people (one on this list I think) mold their own swithces
for PDP-8's. I'm going to atempt this myself for the five missing/broken
switches on my PDP-8/e. (unless someone would sell me a handful :)
When I get around to it (within a few months) I'll document the process
and if its not too hard, maybe I can help others with replacements.
Regards,
Pontus.
10:14 a.m.
I have an 11/70 with "full console" standing next to an 11/70 with
"RDM console". I can check both frames probably on Saturday, and
report back my findings. But Guy will know this too, I guess.
- Henk.
----------------------------------------
Date: Thu, 23 Apr 2009 09:14:05 -0400
Subject: Re: pdp11/70 front panel frame
From: ethan.dicks at gmail.com
To: cctalk at classiccmp.org
On Thu, Apr 23, 2009 at 8:46 AM, Tom Uban wrote:
I'm looking for a frame. They are the same
for all of the
later 11s (e.g. 35, 40, 45, 55, 70).
Paul Anderson wrote:
> I think I have a few front panels left, including the RDC, but not
> sure of the frames. Are they the same as an 11/40 or 11/45?
Are the frames the same on an 11/70 for the RDM and the
lights-and-switches panel? They look the same to me in photos, but I
haven't seen both side-by-side. I ask because both of my 11/70s have
RDMs and I would like to put a lights-and-switches on at least one of
them. Jay West gave me a stripped front panel (no switches) some time
ago, so realistically, I need switches, toggles, and plexiglass to get
that one fully working, but I'd be happy to have lights and no
switches or switches with C&K paddles (which I already have).
-ethan
5548
days inactive
5549
days old
5 comments
6 participants
participants (6)
-
dgriffi＠cs.csubak.edu -
ethan.dicks＠gmail.com -
henk.gooijen＠hotmail.com -
pontus＠Update.UU.SE -
uban＠ubanproductions.com -
useddec＠gmail.com