I have 2 VT100 terminals plus a vt100 plastic shell that I'm parting out. They are VERY yellowed cases, obviously a smoking environment. Definitely some screen burnin too. On at least one of them the fasteners that hold the top of the case to the bottom of the case are broken. I don't think they are worth much more than the junk heap. They all power up and go into setup mode just fine. They are all true VT100's, not 102's, etc. Some or all of the keyboards are missing some keycaps. I think one keyboard may have all it's keys. In addition, I have a vt102 without the top or bottom case. It is in perfect working order, clean, and no burnin with one major flaw. The metal band around the front of the tube has slipped, meaning two of the L brackets that are held down by that band have slipped back so the monitor is about 1/2 inch forward of where it should be. Thus it won't fit into a plastic case quite right. The band is too tight to push the L brackets back into place, and I'm not comfortable cutting that band and trying to put a new one in place (something about working with a large glass object under pressure scares me a bit). So far my plan is to keep the vt102 chassis as spares, and ditch the 2.1 vt100's. If anyone wants me to scavenge parts (logic board, power supply board, flyback, transformer, keycaps, crt tube, etc.) I would be happy to do that. Total price for each shipment will be shipping cost + 5 bucks (unless you just want a keycap or something)...negotiable. The only stipulation is you must let me know in a day or two, I'm itching to get them out of the house and gone. Jay West --- [This E-mail scanned for viruses by Declude Virus]