I'm 'refurbishing' a "nearly ontopic"[1] (yet still kewl) pre-Sun 1U Cobalt Raq3i system[2] and as it's not going to have a rotating media system in it, I was wondering: Does anyone here have any idea if (and if so, how much) the minimum current draw might be on the 12V line? The motherboard is drawing around .27 to .3 A, and I know most "normal" PC power supplies have a 1A minimum on 12V. However, there's very little that's "normal" about this critter. I've googled for any type of specs for this critter, and for actual *hardware* information, there's very little out there, I figgered I'd ask the biggest group of hardware junkies I know of. ;-) *Of course* all replies offlist, please, as this is off-topic. Thanks a lot! Roger "Merch" Merchberger [1] - about 7 years old, IIRC - I'm changing to a little faster processor, set it up to boot from Compact Flash media, and making a small RAM-only DNS server out of the critter... [2] It's not standard PC schtuff, as there's *no* video (but will show POST info on the serial port) and has integrated SCSI on a *very* small motherboard... -- Roger "Merch" Merchberger | "Bugs of a feather flock together." sysadmin, Iceberg Computers | Russell Nelson zmerch at 30below.com |