BA23 setup and DZQ11 configuration - test-drb@ccmp.vtda.org

21 Mar 2007

...

Subject: Re: BA23 setup and DZQ11 configuration
   From: "Ethan Dicks" <ethan.dicks at gmail.com>
   Date: Wed, 21 Mar 2007 11:33:10 -0400
     To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at
classiccmp.org>

On 3/21/07, Mr Ian Primus <ian_primus at yahoo.com> wrote:

  Either that or a trade of a KDJ11-BB or maybe
-BF
 for my KDJ11-AA and some other stuff? 
 Can't you just burn a boot ROM and put it on the CPU
 board? I was under the impression you could. If so, I
 have an EPROM burner and can burn an EPROM if you
 want. 
Dave has nowhere to stuff a ROM.  The KDJ11-A board is dual-height and
is a CPU only, no peripherals (yes, in the mini-computer world, boot
ROMs aren't always integral - if you have a front panel, you don't
"need" ROMs, even if they are handy for fast startup). 
I'm using a KDJ11A and it boots RX02/RL02/MSCP devices with the right 
jumper setup. If memory serves the dual width J11 baord has rom on baord
for standard device boot. My Docs for that board are burried.

Allison