Drool on www.pdp-11.nl/homebrew/pdp8/pdp8startpage.html or www.pdp-11.nl/homebrew/cons1170/cons70startpage.html Have a *good* look at the front panel of the SBC6120, and compare it with a real pdp8/e. You will notice that a few switches are missing. Then check out my front panel ... Given the Blinkenlight board set, you can build a replica yourself either by (a lot of) DYI, or by grabbing a panel of eBay and make a box around it. I am waiting on the arrival of an order of IDC headers for the I/O Board to finish the 11/70 console ... - Henk, PA8PDP. BTW, I will finish the 11/70 console and the first chap that offers $10,000.- will get it :-) - working, running RT11, Advent and perhaps RSX with the chasing light pattern ... This message and attachment(s) are intended solely for the use of the addressee and may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law. If you are not the intended recipient or agent thereof responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by telephone and with a "reply" message. Thank you for your cooperation.