7 Feb
2001
7 Feb
'01
7:34 a.m.
There is a ODE (offline diagnostic env) program called
COPYUTIL
I'm not familiar with COPYUTIL and don't recall seeing in on the 10.20 CD.
I'll have another look.
I've already made a TAR of the entire file system onto tape so, it should be
possible to recover almost any files that might get hosed. Of course in
order to UN-TAR those files, the system has got to be up and running.
Unfortunately, HPUX does not support IGNITE and from what I can tell, the
8.0 version of SAM won't allow me to create a bootable disk.
I have searched docs.hp.com and there's lots of info for 10.20 and 11.00
but, nothing that goes back to 8.0.
OK... Here's another possibility...
What if I make a bootable disk using IGNITE 10.20 (I have a second 832
running 10.20), mount the disk, and then UN-TAR everything from tape on to
that disk?
NOTE: The biggest reason for not upgrading to 10.20 is that I don't have the
ANSI C compiler for 10.20. There's plenty of downloadable software available
but, virtually none of it will run without compiling first. It's a real
catch-22 situation. You gotta have the C compiler in order to compile a C
compiler like GCC. If I'm not mistaken, HP lists the compiler for $1595.
I do have the ANSI C compiler for 8.0 so, it's a lot easier to get software
to run on that box.
Anyone know of an alternate source for the compiler?
Thanks Steve,
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
7 Feb
7 Feb
8:23 a.m.
NOTE: The biggest reason for not upgrading to 10.20 is
that I don't have the
ANSI C compiler for 10.20. There's plenty of downloadable software available
but, virtually none of it will run without compiling first. It's a real
catch-22 situation. You gotta have the C compiler in order to compile a C
compiler like GCC. If I'm not mistaken, HP lists the compiler for $1595.
I do have the ANSI C compiler for 8.0 so, it's a lot easier to get software
to run on that box.
Anyone know of an alternate source for the compiler?
Thanks Steve,
There's always the ready built gcc from the net.
http://hpux.cs.utah.edu/hppd/hpux/Gnu/gcc-2.95.2
--Bill
--
bpechter(a)monmouth.com | FreeBSD since 1.0.2, Linux since 0.99.10
Brainbench MVP | Unix Sys Admin since Sys V/BSD 4.2
Unix Sys.Admin. | Windows System Administration: "Magical Misery Tour"
8:58 a.m.
You CAN get gnu-CC on hpux without a compiler..look at hpux public domain
sites for the downloadable depot.
Should be easy to install on 10.20 w/swinstall.
-Bob
Bob Brown
Saved by grace
Intranet Sysadmin Page: http://info1.harper.cc.il.us/~bbrown
There is a ODE
(offline diagnostic env) program called COPYUTIL
I'm not familiar with COPYUTIL and don't recall seeing in on the
10.20 CD. I'll have another look.
I've already made a TAR of the entire file system onto tape so, it
should be possible to recover almost any files that might get hosed.
Of course in order to UN-TAR those files, the system has got to be
up and running.
Unfortunately, HPUX does not support IGNITE and from what I can
tell, the 8.0 version of SAM won't allow me to create a bootable
disk.
I have searched docs.hp.com and there's lots of info for 10.20 and
11.00 but, nothing that goes back to 8.0.
OK... Here's another possibility...
What if I make a bootable disk using IGNITE 10.20 (I have a second
832 running 10.20), mount the disk, and then UN-TAR everything from
tape on to that disk?
NOTE: The biggest reason for not upgrading to 10.20 is that I don't
have the ANSI C compiler for 10.20. There's plenty of downloadable
software available but, virtually none of it will run without
compiling first. It's a real catch-22 situation. You gotta have the
C compiler in order to compile a C compiler like GCC. If I'm not
mistaken, HP lists the compiler for $1595.
I do have the ANSI C compiler for 8.0 so, it's a lot easier to get
software to run on that box.
Anyone know of an alternate source for the compiler?
Thanks Steve,
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com 
11:10 a.m.
Here is more information on the copyutil from the HP web site.
I got the impression from a different article that it only works on the
8xx servers, but not on the 7xx workstations. You should be OK on your
832's.
Problem Description
How do I use copyutil to create an image of my disk on tape?
Configuration Info
Operating System - HP-UX 10.0
Hardware System - K200
Solution
To create an image of your disk on tape using copyutil,
do the following:
1. Insert the support media into the drive.
2. To execute COPYUTIL, boot to ISL, then type:
ISL> ode copyutil
This gives you a copyright screen and then you get a ISL-CMD
prompt.
3. At the prompt, type:
ISL-CMD> copyutil
This gives you another copywrite screen and then scans the
system's io bus.
4. When you get a COPYUTIL prompt, you can type:
UTILINFO
for a list of options, or just type:
COPYUTIL> backup
This will prompt you to select the disk to backup and the
tape that will be written to.
5. After the backup is made, you will come back to a COPYUTIL
prompt, you can type EXIT here.
6. To recover from tape, get back to the COPYUTIL prompt
following the above steps. then type:
COPYUTIL> restore
This will prompt you to select the tape device and the disk
to restore to.
For more detailed information please order the Support Media
User's Manual, HP part number 92453-90010.
On Wed, 7 Feb 2001, Steve Robertson wrote:
--
There is a ODE
(offline diagnostic env) program called COPYUTIL
I'm not familiar with COPYUTIL and don't recall seeing in on the 10.20 CD.
I'll have another look.
I've already made a TAR of the entire file system onto tape so, it should be
possible to recover almost any files that might get hosed. Of course in
order to UN-TAR those files, the system has got to be up and running.
Unfortunately, HPUX does not support IGNITE and from what I can tell, the
8.0 version of SAM won't allow me to create a bootable disk.
I have searched docs.hp.com and there's lots of info for 10.20 and 11.00
but, nothing that goes back to 8.0.
OK... Here's another possibility...
What if I make a bootable disk using IGNITE 10.20 (I have a second 832
running 10.20), mount the disk, and then UN-TAR everything from tape on to
that disk?
NOTE: The biggest reason for not upgrading to 10.20 is that I don't have the
ANSI C compiler for 10.20. There's plenty of downloadable software available
but, virtually none of it will run without compiling first. It's a real
catch-22 situation. You gotta have the C compiler in order to compile a C
compiler like GCC. If I'm not mistaken, HP lists the compiler for $1595.
I do have the ANSI C compiler for 8.0 so, it's a lot easier to get software
to run on that box.
Anyone know of an alternate source for the compiler?
Thanks Steve,
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
8566
days inactive
8566
days old
3 comments
4 participants
participants (4)
-
bbrown＠harper.cc.il.us -
pechter＠pechter.dyndns.org -
steven_j_robertson＠hotmail.com -
thompson＠mail.athenet.net