With a heavy heart and ever-diminishing storage space, I'm going to part with my HP64000 development system. This is a soup-to-nuts setup including: - HP64000 desktop unit (all-in-one w/ keyboard and floppy drives) - External HPIB hard disk (from an HP9000, i.e. physically small) - CPU Pods for 68000, 68010, Z80, 8085, 8088 and 8051. I do not have the interface boards for everything and have never used them. Some look to be brand new. - More interface and emulation boards (for internal card frame) than I know what to do with. Spares for just about everything. - Several EPROM programmer adapters (mount in main system unit). - Tape drive mechanism (internal mount, was replaced by diskette drives) - Two 4ft. shelves full of manuals - hardware and software - Complete cross-assembler and cross-compiler software for every 1978-1982 CPU you have ever heard of and perhaps some you haven't. Probably 2-3 linear feet of 5-1/4" diskettes, most the original distribution media. The last time I fired it up, the main unit worked fine. It boots from the attached HPIB drive and was able to access the floppy drives without error. I won't even consider shipping it, you will need to pick it up in Burlington, VT and must take everything with you. Note that I haven't mentioned price. That's because there isn't any. Terms are simple: Free to the first person who makes arrangements with me for pickup and appears at my door. Steve --