Two pdp-11/44 questions:
Does anyone have a 'big list' of pdp-11 boot rom id's? (should probably
be in the same place as a repository - is that being set up?)
Also, has anyone tried to use vtserver on an 11/44? I don't think it
can be done because the console 8085 catches "^P" and pops back into the
console monitor.
I suppose the right thing is to plug in a serial cable use the tu-58
emulator. But I don't think I have tu-58 proms. My one and only boot
prom id's as 054021. And I have no idea what that is.
I suppose I could hack server to use a second serial port. Blech. I
guess I should just use the 9-track tape drive the way Ken Olsen
intended and stop fooling around :-)
-brad
Hi,
This is a list from the M9312 manual, it is afaik the complete list.
Ed
First device ROM Second device
Console emulator 23-248F1
RL01/02 23-751A9
RK06/07 23-752A9
RX01 23-753A9
RP02/03 23-755A9 RP04/05/06 RM02/03
RK03/05 23-756A9 TU55/56
TU16/TE16 23-757A9
TU10/TE10/TS03 23-758A9
RS03/04 23-759A9
PC05 23-760A9 DL11-A/W
TU60 23-761A9
RX02 23-811A9
TS04 23-764A9
?? 23-765A9
RDxx/RAxx 23-767A9
Diagnostics(?) 23-616F1
I have all except the 753A9.
This is a list
from the M9312 manual, it is afaik the complete list.
the part # is helpful, but what I also need is the contents of the
"id" which can be seen via the console ODT...
-brad
If I remember correctly, the 2 character code and the table with the
DEC part numbers is in Appendix E of the M9312 manual. I think
I got my copy of the manual from Al's bitsavers at:
http://www.bitsavers.org/pdf/dec/unibus/M9312_TechRef.pdf
Ashley