-----Oorspronkelijk bericht-----
Van: cctalk-bounces at
classiccmp.org
[mailto:cctalk-bounces at
classiccmp.org] Namens Rik Bos
Verzonden: dinsdag 2 maart 2010 19:50
Aan: 'General Discussion: On-Topic and Off-Topic Posts'
Onderwerp: HP 9825 tape drive
I modified a HP 9825A tape drive for use with QIC 40/80 tapes.
It's a rather easy conversion building a new capstand wheel
witch is a little higher so it can drive the QIC tapes and
increasing the write current by replacing a the current
limiter resistor.
It's under test and at the moment seems to work.
I was curious if there others who did the same and what
theire experiances are...
-Rik