-----Original Message----- From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org]On Behalf Of Andreas Holz Sent: maandag 13 juni 2005 8:58 To: On-Topic and Off-Topic Posts Subject: Emulex UC17/UC18 SCSI-Controller in PDP11/24 Hello all, I'm trying to configure an Emulex UC18 SCSI-Controller in a PDP11/24. From the switch settings (MSCP) the Device Base Adresses of the two SCSI channels are 17772150 and 17760334. Looking at the UC17 Manual (bitsavers) on page "Installation 4-33" I found to enter the following at the 11/24 ODT prompt: @177xxxxx 1 <LF> /177yyyyy 30003 <CR> ... based on the real adresses e.g.: from table 4-13 on page 4-31 xxxxx = 60334 and yyyyy = 60336 @17760334 1 <LF> -> but how to enter such a long adress on a 11/24? What is going wrong? Andreas