16 Mar
2002
16 Mar
'02
12:57 a.m.
I have an 820 I'll let go reasonably. Shipping will be a bit of a PITA.
Where are you located?
SteveRob
From: Tom Uban <uban(a)ubanproductions.com>
Reply-To: classiccmp(a)classiccmp.org
To: classiccmp(a)classiccmp.org
Subject: RE: Z80 BigBoard ID Needed
Date: Sat, 16 Mar 2002 08:34:35 -0600
BTW, I am interested in either a z80 big board or a xerox 820 if
anyone has one they want to find a new home for...
--tom
At 09:03 AM 3/16/02 -0500, you wrote:
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
> At 10:03 PM 3/15/02 -0600, you wrote:
> >I've got what I was told is a BigBoard. Can someone check
> >out the picture at:
> >
> >http://www.dittman.net/z80.jpg
> >
> >and see if you recognize it?
>
> That is a Xerox 820, which is the same schematically as a z80 big
board.
> The big board was a different form factor
(the same size as an 8"
floppy
>> drive) and was usually a kit.
>
>If California Digital is still in business, I believe the
>boxed CP/M they were (are?) selling is for the Xerox 820...
>
>If gone now, I have a copy...
>
>-dq
>
> 
16 Mar
16 Mar
1:17 a.m.
Speaking of the Xerox 820 ... I've got a little daughterboard that was made by
a local company, the purpose of which was to introduce a 179x where the 1771
lives. With the addition of some software I don't have, it makes the thing
double-density (MFM) capable. It even has a wire with an "EZ-Hook" for
attaching to a parallel port bit, though I don't know which one. <sigh>
With less than a week's effort, I could find this thing, but it would take a
concentrated effort of a month or so to find the one-sheet document that went
with it.
Dick
----- Original Message -----
From: "Steve Robertson" <steven_j_robertson(a)hotmail.com>
To: <classiccmp(a)classiccmp.org>
Sent: Saturday, March 16, 2002 7:57 AM
Subject: RE: Z80 BigBoard ID Needed
I have an 820 I'll let go reasonably. Shipping
will be a bit of a PITA.
Where are you located?
SteveRob
From: Tom Uban <uban(a)ubanproductions.com>
Reply-To: classiccmp(a)classiccmp.org
To: classiccmp(a)classiccmp.org
Subject: RE: Z80 BigBoard ID Needed
Date: Sat, 16 Mar 2002 08:34:35 -0600
BTW, I am interested in either a z80 big board or a xerox 820 if
anyone has one they want to find a new home for...
--tom
At 09:03 AM 3/16/02 -0500, you wrote:
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
> At 10:03 PM 3/15/02 -0600, you wrote:
> >I've got what I was told is a BigBoard. Can someone check
> >out the picture at:
> >
> >http://www.dittman.net/z80.jpg
> >
> >and see if you recognize it?
>
> That is a Xerox 820, which is the same schematically as a z80 big
board.
> The big board was a different form factor
(the same size as an 8"
floppy
>> drive) and was usually a kit.
>
>If California Digital is still in business, I believe the
>boxed CP/M they were (are?) selling is for the Xerox 820...
>
>If gone now, I have a copy...
>
>-dq
>
> 
2:30 a.m.
Speaking of the Xerox 820 ... I've got a little
daughterboard that was made by
a local company, the purpose of which was to introduce a 179x where the 1771
lives. With the addition of some software I don't have, it makes the thing
double-density (MFM) capable. It even has a wire with an "EZ-Hook" for
attaching to a parallel port bit, though I don't know which one. <sigh>
With less than a week's effort, I could find this thing, but it would take a
concentrated effort of a month or so to find the one-sheet document that went
with it.
I'd definitely be interested in this.
--
Eric Dittman
dittman(a)dittman.net
Check out the DEC Enthusiasts Club at http://www.dittman.net/
27 Mar
27 Mar
7:27 a.m.
Hi Dick,
If you do manage to locate the information on that daughterboard, I would
be interested in a copy.
--tnx
--tom
At 08:17 AM 3/16/02 -0700, you wrote:
Speaking of the Xerox 820 ... I've got a little
daughterboard that was
made by
a local company, the purpose of which was to introduce
a 179x where the 1771
lives. With the addition of some software I don't have, it makes the thing
double-density (MFM) capable. It even has a wire with an "EZ-Hook" for
attaching to a parallel port bit, though I don't know which one. <sigh>
With less than a week's effort, I could find this thing, but it would take a
concentrated effort of a month or so to find the one-sheet document that went
with it.
Dick
----- Original Message -----
From: "Steve Robertson" <steven_j_robertson(a)hotmail.com>
To: <classiccmp(a)classiccmp.org>
Sent: Saturday, March 16, 2002 7:57 AM
Subject: RE: Z80 BigBoard ID Needed
I have an 820 I'll let go reasonably.
Shipping will be a bit of a PITA.
Where are you located?
SteveRob
From: Tom Uban <uban(a)ubanproductions.com>
Reply-To: classiccmp(a)classiccmp.org
To: classiccmp(a)classiccmp.org
Subject: RE: Z80 BigBoard ID Needed
Date: Sat, 16 Mar 2002 08:34:35 -0600
BTW, I am interested in either a z80 big board or a xerox 820 if
anyone has one they want to find a new home for...
--tom
At 09:03 AM 3/16/02 -0500, you wrote:
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
> At 10:03 PM 3/15/02 -0600, you wrote:
> >I've got what I was told is a BigBoard. Can someone check
> >out the picture at:
> >
> >http://www.dittman.net/z80.jpg
> >
> >and see if you recognize it?
>
> That is a Xerox 820, which is the same schematically as a z80 big
board.
> The big board was a different form factor
(the same size as an 8"
floppy
>> drive) and was usually a kit.
>
>If California Digital is still in business, I believe the
>boxed CP/M they were (are?) selling is for the Xerox 820...
>
>If gone now, I have a copy...
>
>-dq
>
>
8306
days inactive
8317
days old
3 comments
4 participants
participants (4)
-
dittman＠dittman.net -
edick＠idcomm.com -
steven_j_robertson＠hotmail.com -
uban＠ubanproductions.com