PDP-11/10 Boards? - test-drb@ccmp.vtda.org

27 Oct 2004

Check www.pdp-11.nl  and click on the link 11/10 at the left.
There is also a boards position lay-out for the *4* different
backplanes ... Let me know if you miss something; new info is
aways a stimulus to update the pages; as hearing they are read.

- Henk, PA8PDP

...
  -----Original Message-----
 From: cctalk-bounces(a)classiccmp.org
 [mailto:cctalk-bounces@classiccmp.org]On Behalf Of John Allain
 Sent: donderdag 28 oktober 2004 2:16
 To: General Discussion: On-Topic and Off-Topic Posts
 Subject: Re: PDP-11/10 Boards?

  Does anyone here happen to know what boards a
PDP-11/10   should have in it?
  I don't happen to have that vintage of
handbooks handy at   the moment.

 Here's my inventory notes on the machine...

 CPU:
    M7260 KD11-B        11/05 data paths module
    M7261 KD11-B        11/05 control logic module
 memory:
    H214   8-Kword 16-bit H213 (used in MM11-L)(replaced by H215)
    G110   16 bit 11/05, 11/25, 11/45 Control & Data Loops, HEXx8.5
    G231   16K XY Selection, Current source, Address Latch, 8K Decode.
    G231   16K XY Selection, Current source, Address Latch, 8K Decode.
    G110   16 bit 11/05, 11/25, 11/45 Control & Data Loops, HEXx8.5
    H214   8-Kword 16-bit H213 (used in MM11-L) (replaced by H215)
 options:
    DF11           (tbs)(in slot 1) (control panel?)
    M7254 RK11-D        RK05 status control module
    M7255 RK11-D        RK05 disk control module
    M7256 RK11-D        RK05 registers module (data path)
    M7257 RK11-D        RK05 bus control module

 Hope this helps,
 John A.