16 Dec
2003
16 Dec
'03
5:49 a.m.
If you hadn't noticed, most (all?) Macintosh models from the first through
the Mac IIs had a slot on the back for inserting a security mechanism so
that the computer could be chained to a desk.
The Macintosh Portable also has this feature. Does anyone know of, or
have, an actual locking mechanism that was made for the Macintosh
Portable?
Actual examples or documentation thereof will suffice if you've got them.
Thanks!
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
[ Old computing resources for business || Buy/Sell/Trade Vintage Computers ]
[ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]
16 Dec
16 Dec
9:22 a.m.
If you hadn't noticed, most (all?) Macintosh models from the first through
the Mac IIs had a slot on the back for inserting a security mechanism so
that the computer could be chained to a desk.
Yes, and it was pretty much a useless feature...
About 7 years ago somebody came to me because a Mac+ had been locked to a
desk by said device, and it needed to be moved (and for that matter it
needed to be repaired). Alas he'd managed to lose the key.
Now, I had ample evidence that he was allowed to move said computer, so I
descended to the computer room with my trusty long TX15 driver and some
other tools. Without removing the lock i undid the 5 screws on the back
and pusehed the guts out of the case. Then a bit of tweaking with a
screwdriver on the hooks on the sides of said hole enabled me to remove
the locking loop thingy without damage.
Then all I had to do was resolder the dry joint on the scanning yoke
connector and put the case back on. The machine was uncoupled from the
locking device without damaing either part.
-tony
7677
days inactive
7677
days old
1 comments
2 participants
participants (2)
-
ard＠p850ug1.demon.co.uk -
vcf＠siconic.com