Hi, I picked up a VFX1 virtual reality headset from ebay at a killer price. Now the problem with the VFX1 is that the interface card is limited to only 640x480x256 colors, whereas the VFX1 helmet can run in 16bit or truecolor. To get stereoscopic mode, the VFX1 uses interlaced video to send even lines to one LCD and odd lines to the other LCD. What would it take to tap the VGA output and somehow determine which lines are even and which lines are odd and feed it to the helment directly? This is similar to the way a TV works. Searching though the net yielding the following hack: http://www.lpc.ufri.br/~dmendes/new_page_1.htm (use altavista to translate from Portugese) But he feeds the same signal to both LCDs thus stereo is lost. Any comments? Tony?? Ram -- ,,,, /'^'\ ( o o ) -oOOO--(_)--OOOo------------------------------------- | Ram Meenakshisundaram | | Senior Software Engineer | | OpenLink Financial Inc | | .oooO Phone: (516) 227-6600 x267 | | ( ) Oooo. Email: rmeenaks(a)olf.com | ---\ (----( )-------------------------------------- \_) ) / (_/