Thanks for the info, I'm driving this puppy 850 miles though. Is the
clip permanently attached to the positioner?
-----Original Message-----
From: ard(a)p850ug1.demon.co.uk [mailto:ard@p850ug1.demon.co.uk]
Sent: Sunday, August 30, 1998 10:04 AM
To: Discussion re-collecting of classic computers
Subject: Re: RL02 Drive Transportaion Questions
Hey folks,
I'm going to pickup a system in a week or two, and it's got RL02
Drives.
I haven't seen one of these in years. Any
shipping hints, locking
screws,
There is a locking clip on the head positioner, but in my experience the
positioner is stiff enough not to need locking for short moves.
Do make sure there are no packs in them. To open the top cover, either
remove the little plate on the RHS (if it's an old drive) and frob the
solenoid (and replace the plate afterwards), or undo the access cover on
top and release the door that way. Take out any packs you find in the
drives, but keep them, as one may well be a bootable OS.
etc?
Thanks.
-tony