I have many hundreds of 10 sector disks. Most have programs on them, but
they are not of much use. I could help out with a few if someone is in
great need.
Doug
At 10:51 PM 12/1/97 -0500, you wrote:
Doug Coward wrote:
> Any way, I have some PRELIMINARY results from my first little research
project.
> For some time now I've been worried that when
my last two boxes of 10
sector
> hard sector mini-floppies were gone, I would not
be able to find any more.
> So, I started toying with the idea that I could make my own floppies.
> Last weekend, using a 1/8" paper punch, I changed 3 DSDD soft sectored
floppies
> into 3 DSDD 10 sector hard sector floppies by
punching 10 more holes in
them!
> AND THEY WORKED!
> So far I've just tested them on an IMSAI and a North Star Horizon using
CP/M
> 1.4 and NSDOS. NO PROBLEMS! (Format,copy disk,boot
with new disk)
> North Star DOS has a DT (Disk Test) command that writes an incrementing
pattern
> to the entire disk starting at track 0 (over and
over until you press
ctl-C).
AGAIN NO
PROBLEM!
So where the Hell do you find a 1/8" paper punch? The only ones I find
seem to be closer to 3/16" or 1/4". Like the ones I used back when I
thought it was practical to flip TRS-80 diskettes. (It wasn't. They
worked -- for a while, especially when diskettes were $20+ per ten.)
--
Ward Griffiths
"Men will never be free until the last king is strangled with the entrails
of the last priest." [Denis Diderot, "Dithyrambe sur la fete de rois"]