12 Aug
2015
12 Aug
'15
11:12 p.m.
Well, here's another update on my never ending/ always changing list of
quad and hex boards. These are all M7xxx, and the M8xxx should be done in a
week or so. There are a few boards here I will be using myself, But I am
planning on selling off about 80% of my DEC equipment. All is located in
zip 61853 and most is shipable. There are a lot of boards to go through
yet, and this list does not show any PDP8 parts or industrial control, but
feel free to inquire.
There are still some DEC things I am willing to trade for, but I also
collect US, Great Britain, and Canadian and other coins, boy scout items,
and from our English members or anyone else who knows what it is, Doulton,
mostly Lambeth. Old microscopes, and almost anything Zeiss. Cash always
works.
Please contact me off list.
https://doc-0s-6g-docs.googleusercontent.com/docs/securesc/o60568klv0gtnika…
12 Aug
12 Aug
11:25 p.m.
When I visited this link, I ended up with a blank, white page.
JRJ
On 8/12/2015 10:12 PM, Paul Anderson wrote:
Well, here's another update on my never ending/
always changing list of
quad and hex boards. These are all M7xxx, and the M8xxx should be done in a
week or so. There are a few boards here I will be using myself, But I am
planning on selling off about 80% of my DEC equipment. All is located in
zip 61853 and most is shipable. There are a lot of boards to go through
yet, and this list does not show any PDP8 parts or industrial control, but
feel free to inquire.
There are still some DEC things I am willing to trade for, but I also
collect US, Great Britain, and Canadian and other coins, boy scout items,
and from our English members or anyone else who knows what it is, Doulton,
mostly Lambeth. Old microscopes, and almost anything Zeiss. Cash always
works.
Please contact me off list.
https://doc-0s-6g-docs.googleusercontent.com/docs/securesc/o60568klv0gtnika…
11:26 p.m.
Thanks Jay,
I was afraid i messed in up....
On Wed, Aug 12, 2015 at 10:25 PM, Jay Jaeger <cube1 at charter.net> wrote:
When I visited this link, I ended up with a blank,
white page.
JRJ
On 8/12/2015 10:12 PM, Paul Anderson wrote:
Well, here's another update on my never
ending/ always changing list of
quad and hex boards. These are all M7xxx, and the M8xxx should be done
in a
week or so. There are a few boards here I will be
using myself, But I am
planning on selling off about 80% of my DEC equipment. All is located in
zip 61853 and most is shipable. There are a lot of boards to go through
yet, and this list does not show any PDP8 parts or industrial control,
but
feel free to inquire.
There are still some DEC things I am willing to trade for, but I also
collect US, Great Britain, and Canadian and other coins, boy scout items,
and from our English members or anyone else who knows what it is,
Doulton,
mostly Lambeth. Old microscopes, and almost
anything Zeiss. Cash always
works.
Please contact me off list.
https://doc-0s-6g-docs.googleusercontent.com/docs/securesc/o60568klv0gtnika…
13 Aug
13 Aug
12:58 a.m.
On 8/12/2015 8:26 PM, Paul Anderson wrote:
Thanks Jay,
I was afraid i messed in up....
On Wed, Aug 12, 2015 at 10:25 PM, Jay Jaeger <cube1 at charter.net> wrote:
> When I visited this link, I ended up with a blank, white page.
>
> JRJ
>
I get a blank page too, no action. Google drive shares don't leave much
you can adjust to try to fix links. The entire link got thru fine, but
it isn't working.
Maybe you need to make sure it is view, and public.
thanks
Jim
1:33 a.m.
This might work better
https://drive.google.com/file/d/0B2MOaRm-6XKNV3hENS1Hd1lURXc/view?usp=shari…
On Wed, Aug 12, 2015 at 11:58 PM, jwsmobile <jws at jwsss.com> wrote:
On 8/12/2015 8:26 PM, Paul Anderson wrote:
Thanks Jay,
I was afraid i messed in up....
On Wed, Aug 12, 2015 at 10:25 PM, Jay Jaeger <cube1 at charter.net> wrote:
When I visited this link, I ended up with a blank, white page.
>
> JRJ
>
> I get a blank page too, no action. Google drive shares don't leave much
you can adjust to try to fix links. The entire link got thru fine, but it
isn't working.
Maybe you need to make sure it is view, and public.
thanks
Jim
1:42 a.m.
Sorry, this wasn't done the way i wanted. for the 2 digit numbers place a
70 in front, for the rest , just put a M7 in front.
On Thu, Aug 13, 2015 at 12:33 AM, Paul Anderson <useddec at gmail.com> wrote:
This might work better
https://drive.google.com/file/d/0B2MOaRm-6XKNV3hENS1Hd1lURXc/view?usp=shari…
On Wed, Aug 12, 2015 at 11:58 PM, jwsmobile <jws at jwsss.com> wrote:
On 8/12/2015 8:26 PM, Paul Anderson wrote:
Thanks Jay,
I was afraid i messed in up....
On Wed, Aug 12, 2015 at 10:25 PM, Jay Jaeger <cube1 at charter.net> wrote:
When I visited this link, I ended up with a blank, white page.
>
> JRJ
>
> I get a blank page too, no action. Google drive shares don't leave
much
you can adjust to try to fix links. The entire link got thru fine,
but it isn't working.
Maybe you need to make sure it is view, and public.
thanks
Jim
2:38 a.m.
Hi
Many interesting boards. I tried to identify them with the field guide:
http://world.std.com/~mbg/pdp11-field-guide.txt
But many numbers didn't exist there. For instance M7765 of which you
have 15.
Have I missed something?
/P
On Thu, Aug 13, 2015 at 12:42:53AM -0500, Paul Anderson wrote:
Sorry, this wasn't done the way i wanted. for the
2 digit numbers place a
70 in front, for the rest , just put a M7 in front.
On Thu, Aug 13, 2015 at 12:33 AM, Paul Anderson <useddec at gmail.com> wrote:
> This might work better
>
>
> https://drive.google.com/file/d/0B2MOaRm-6XKNV3hENS1Hd1lURXc/view?usp=shari…
>
> On Wed, Aug 12, 2015 at 11:58 PM, jwsmobile <jws at jwsss.com> wrote:
>
>>
>>
>> On 8/12/2015 8:26 PM, Paul Anderson wrote:
>>
>>> Thanks Jay,
>>>
>>> I was afraid i messed in up....
>>>
>>> On Wed, Aug 12, 2015 at 10:25 PM, Jay Jaeger <cube1 at charter.net>
wrote:
>>>
>>> When I visited this link, I ended up with a blank, white page.
>>>>
>>>> JRJ
>>>>
>>>> I get a blank page too, no action. Google drive shares don't leave
>> much you can adjust to try to fix links. The entire link got thru fine,
>> but it isn't working.
>>
>> Maybe you need to make sure it is view, and public.
>>
>> thanks
>> Jim
>>
>>
>
3:57 a.m.
Hi Pontus,
No, you probably didn't miss anything. I have several students working for
me and they don't always get it. Sorry, I'll try to correct it next week.
Thanks, Paul
On Thu, Aug 13, 2015 at 1:38 AM, Pontus Pihlgren <pontus at update.uu.se>
wrote:
Hi
Many interesting boards. I tried to identify them with the field guide:
http://world.std.com/~mbg/pdp11-field-guide.txt
But many numbers didn't exist there. For instance M7765 of which you
have 15.
Have I missed something?
/P
On Thu, Aug 13, 2015 at 12:42:53AM -0500, Paul Anderson wrote:
Sorry, this wasn't done the way i wanted.
for the 2 digit numbers place
a
70 in front, for the rest , just put a M7 in
front.
On Thu, Aug 13, 2015 at 12:33 AM, Paul Anderson <useddec at gmail.com>
wrote:
> This might work better
>
>
>
https://drive.google.com/file/d/0B2MOaRm-6XKNV3hENS1Hd1lURXc/view?usp=shari…
>
> On Wed, Aug 12, 2015 at 11:58 PM, jwsmobile <jws at jwsss.com> wrote:
>
>>
>>
>> On 8/12/2015 8:26 PM, Paul Anderson wrote:
>>
>>> Thanks Jay,
>>>
>>> I was afraid i messed in up....
>>>
>>> On Wed, Aug 12, 2015 at 10:25 PM, Jay Jaeger <cube1 at charter.net>
wrote:
>>>
>>> When I visited this link, I ended up with a blank, white page.
>>>>
>>>> JRJ
>>>>
>>>> I get a blank page too, no action. Google drive shares don't leave
>> much you can adjust to try to fix links. The entire link got thru
fine,
>> but it isn't working.
>>
>> Maybe you need to make sure it is view, and public.
>>
>> thanks
>> Jim
>>
>>
>
11:26 a.m.
I turned the list into a CSV, based on M7... assumption, using the list at
http://bitsavers.org/pdf/dec/modules/modulesAndOptions/editedOptionModuleLs…
M700/M70/M7,qty,From editedOptionModuleLst_Apr83.pdf
0,,VT05 Cursor
13,,VT40 (?) vector/char gen
14,,VT40 (?) boot/term
24,,VT55 Graph. Ctl
25,,KW11-K Dual programmable clock (LDP)
26,,???? Not listed
27,,???? Not Listed
86,,PTV11-E Control
92,11,PDP-11/44 KE44-A CIS Data Path/Logic
94,2,PDP-11/44 KD11-Z Data Path
95,,PDP-11/44 KD11-Z Control
96,,PDP-11/44 KD11-Z Multifunction Module
98,,PDP-11/44 KD11-Z Unibus
110,,DS11 Synch. Modem interface
122,3,RT801 FDC Microprocessor Controller
123,,RT805 FDC Serial Line Interface
127,3,RT800 FDC Serial Bus Port
128,2,???? Not Listed
135,,???? Not Listed
136,,???? Not Listed
147,2,M7808 (M7247 + M7246) W/ Synchronized Scanner (DM11)
164,13,???? Not Listed
165,14,???? Not Listed
168,2,???? Not Listed
196,6,TSV05 Controller
211,,KE11-A Register Control (PDP-11/20 Extended Arithmetic Element)
219,2,RC11 Bus Interface
228,5,KW11-P Programmable RTC
232,4,PDP-11/40 KD11-A uWord
244,,DM11 Transmitter
251,12,XOR & CRC Block KG11-A
254,6,RK11-D Status Control
255,6,"RK11-D Disk Control [NOTE: If -YA, modified for Diablo Series 30]"
256,3,RK11-D Registers
257,5,RD11-D Bus Control
258,12,LP11/LS11 Interface
259,,Parity for MF11-LP
260,,PDP-11/05 KD11-B Data Paths
264,19,PDP-11/03 Processor w 4K RAM
268,,RKV11-D Qbus
280,2,"8 UARTS on Quad, DJ11"
410,3,???? Not Listed
454,8,???? Not Listed
485,2,UDA50-A Unibus to Radial Disk w/No ROMS
500,,PDP-11/23 Qual Serial Line Qbus Interface
507,2,???? Not Listed
508,,???? Not Listed
509,,???? Not Listed
510,,???? Not Listed
521,,???? Not Listed
546,2,???? Not Listed
547,2,???? Not Listed
551,6,???? Not Listed
552,2,???? Not Listed
554,5,???? Not Listed
555,4,???? Not Listed
556,4,???? Not Listed
577,,???? Not Listed
602,6,???? Not Listed
605,2,???? Not Listed
606,,???? Not Listed
608,13,???? Not Listed
609,9,???? Not Listed
620,7,???? Not Listed
621,24,???? Not Listed
622,25,???? Not Listed
624,5,???? Not Listed
625,2,???? Not Listed
626,3,???? Not Listed
637,,???? Not Listed
639,2,???? Not Listed
677,7,???? Not Listed
706,2,RK06 Interface & Timing
744,20,RX02 Control
745,14,RX02 Read/Write
765,15,???? Not Listed
769,10,???? Not Listed
772,3,RP04 Synchronous Logic
773,3,RP04 Asynchronous Logic
774,4,RP04 Register Logic
775,2,RP04 Dual Port Logic
776,4,RP04 Error Correction Logic
787,,RP05/6 Interfqace Control
793,,DEUNA Link Module (M7792 to Ethernet Bus Line Unit)
800,32,"Asynch Transmitter/Receiver, KL11 (Various submodels exist)"
803,,Arbitration Control for MC11
807,2,"M7247, M105, M7821 on One Quad, EIA Only (DM11)"
810,6,M781 + M105 + M7821 on one Quad (Paper Tape Interface)
814,3,"8-Line 20MA Data Mux, 50 to 100K Baud DZ11-C, DZ11-D, DZ11-F"
819,3,DZ11-A 8 Line Dbl Buf Async EIA 50 to 96 Kbaud W 103A Modem Control
821,,Fast M7280 (Interrupt Control)
822,12,DU11
846,2,RX01 UNIBUS Interface
847,22,MS11 Memory (Various Submodels exist)
850,15,"MM11-BP, MM111-CP Parity Board for G651, MS-11-?P"
856,14,"DL11-W, SLU/RTC Option"
859,2,PDP-11/34 KY11-LB Console Interface (8008 CPU)
860,4,DR11-C = M786+M105+M7821
864,,DR11-L 2 Word UNIBUS Input Interface
867,,DUP11-DA SDLC or DDCMP Sync Interface
876,,PDP-11/60 KD11-K Timing
891,,MS11-L? (Varous Submodels Exist)
893,3,"DRS11, 48 outputs (Various submodels exist: TTL, Open Collector)"
894,,"DRS11, 48 Optical Isolated Outputs"
896,,"DRS11 48 Contact Sense Inputs (Submodels exist - 24V, 48V)"
903,,RK611 Data
904,,RK611 Drive Interface
908,,RK07 Track Position Detector
910,,M791+M105_M7821 Parallel Interface to LA30P
911,,"TMB11 Tabe Control 1, Hex"
921,,MA11-F Data Multiplexor
922,,MA11-F Address Multiplexor
923,,MA11-F Mux Control
930,2,M793+M105+M7821 Interface to Data Products line printers
944,2,MSV11-B 4K 16 Bit MOS
946,5,RXV11 Control
950,3,DRV11-B DMA 16 Bit Parallel Interface
951,2,DUV11-DA Sync Interface
952,,"KWV11-A LSI11 Bus, Programmable RTC"
955,3,MSV11-?D (Various Submodels Exist)
957,33,"DZV11, 4 Line Dlb Buf Async Mux EIA 50 - 10 K Baud W 103 Modem
Control"
958,,Q-Bus to I/O Daisy Chain Bus Control & Interface
982,,TS11 UNIBUS to Serial Bus Controller
983,2,MFS11-K Family Control
991,2,PCL11-B TXM (Transmitter) Interface
992,2,PCL11-B TXM UNIBUS Control
993,2,PCL11-B TXM Registers
994,2,PCL11-B TDM Bus Logic * Drivers
995,2,PCL11-B RCV (Receiver) Registers
996,2,PCL11-B RCV UNIBUS Control
997,2,"PCL11-B RCV Interface,"
On 8/13/2015 2:57 AM, Paul Anderson wrote:
Hi Pontus,
No, you probably didn't miss anything. I have several students working for
me and they don't always get it. Sorry, I'll try to correct it next week.
Thanks, Paul
On Thu, Aug 13, 2015 at 1:38 AM, Pontus Pihlgren <pontus at update.uu.se>
wrote:
Hi
Many interesting boards. I tried to identify them with the field guide:
http://world.std.com/~mbg/pdp11-field-guide.txt
But many numbers didn't exist there. For instance M7765 of which you
have 15.
Have I missed something?
/P
On Thu, Aug 13, 2015 at 12:42:53AM -0500, Paul Anderson wrote:
Sorry, this wasn't done the way i wanted.
for the 2 digit numbers place
a
70 in front, for the rest , just put a M7 in
front.
On Thu, Aug 13, 2015 at 12:33 AM, Paul Anderson <useddec at gmail.com>
wrote:
> This might work better
>
>
>
https://drive.google.com/file/d/0B2MOaRm-6XKNV3hENS1Hd1lURXc/view?usp=shari…
>
> On Wed, Aug 12, 2015 at 11:58 PM, jwsmobile <jws at jwsss.com> wrote:
>
>>
>>
>> On 8/12/2015 8:26 PM, Paul Anderson wrote:
>>
>>> Thanks Jay,
>>>
>>> I was afraid i messed in up....
>>>
>>> On Wed, Aug 12, 2015 at 10:25 PM, Jay Jaeger <cube1 at charter.net>
wrote:
>>>
>>> When I visited this link, I ended up with a blank, white page.
>>>>
>>>> JRJ
>>>>
>>>> I get a blank page too, no action. Google drive shares don't leave
>> much you can adjust to try to fix links. The entire link got thru
fine,
>> but it isn't working.
>>
>> Maybe you need to make sure it is view, and public.
>>
>> thanks
>> Jim
>>
>>
>
11:29 a.m.
Thanks Jay, I'll try to figure out it the non listed are typos or newer
boards.
On Thu, Aug 13, 2015 at 10:26 AM, Jay Jaeger <cube1 at charter.net> wrote:
I turned the list into a CSV, based on M7...
assumption, using the list at
http://bitsavers.org/pdf/dec/modules/modulesAndOptions/editedOptionModuleLs…
M700/M70/M7,qty,From editedOptionModuleLst_Apr83.pdf
0,,VT05 Cursor
13,,VT40 (?) vector/char gen
14,,VT40 (?) boot/term
24,,VT55 Graph. Ctl
25,,KW11-K Dual programmable clock (LDP)
26,,???? Not listed
27,,???? Not Listed
86,,PTV11-E Control
92,11,PDP-11/44 KE44-A CIS Data Path/Logic
94,2,PDP-11/44 KD11-Z Data Path
95,,PDP-11/44 KD11-Z Control
96,,PDP-11/44 KD11-Z Multifunction Module
98,,PDP-11/44 KD11-Z Unibus
110,,DS11 Synch. Modem interface
122,3,RT801 FDC Microprocessor Controller
123,,RT805 FDC Serial Line Interface
127,3,RT800 FDC Serial Bus Port
128,2,???? Not Listed
135,,???? Not Listed
136,,???? Not Listed
147,2,M7808 (M7247 + M7246) W/ Synchronized Scanner (DM11)
164,13,???? Not Listed
165,14,???? Not Listed
168,2,???? Not Listed
196,6,TSV05 Controller
211,,KE11-A Register Control (PDP-11/20 Extended Arithmetic Element)
219,2,RC11 Bus Interface
228,5,KW11-P Programmable RTC
232,4,PDP-11/40 KD11-A uWord
244,,DM11 Transmitter
251,12,XOR & CRC Block KG11-A
254,6,RK11-D Status Control
255,6,"RK11-D Disk Control [NOTE: If -YA, modified for Diablo Series 30]"
256,3,RK11-D Registers
257,5,RD11-D Bus Control
258,12,LP11/LS11 Interface
259,,Parity for MF11-LP
260,,PDP-11/05 KD11-B Data Paths
264,19,PDP-11/03 Processor w 4K RAM
268,,RKV11-D Qbus
280,2,"8 UARTS on Quad, DJ11"
410,3,???? Not Listed
454,8,???? Not Listed
485,2,UDA50-A Unibus to Radial Disk w/No ROMS
500,,PDP-11/23 Qual Serial Line Qbus Interface
507,2,???? Not Listed
508,,???? Not Listed
509,,???? Not Listed
510,,???? Not Listed
521,,???? Not Listed
546,2,???? Not Listed
547,2,???? Not Listed
551,6,???? Not Listed
552,2,???? Not Listed
554,5,???? Not Listed
555,4,???? Not Listed
556,4,???? Not Listed
577,,???? Not Listed
602,6,???? Not Listed
605,2,???? Not Listed
606,,???? Not Listed
608,13,???? Not Listed
609,9,???? Not Listed
620,7,???? Not Listed
621,24,???? Not Listed
622,25,???? Not Listed
624,5,???? Not Listed
625,2,???? Not Listed
626,3,???? Not Listed
637,,???? Not Listed
639,2,???? Not Listed
677,7,???? Not Listed
706,2,RK06 Interface & Timing
744,20,RX02 Control
745,14,RX02 Read/Write
765,15,???? Not Listed
769,10,???? Not Listed
772,3,RP04 Synchronous Logic
773,3,RP04 Asynchronous Logic
774,4,RP04 Register Logic
775,2,RP04 Dual Port Logic
776,4,RP04 Error Correction Logic
787,,RP05/6 Interfqace Control
793,,DEUNA Link Module (M7792 to Ethernet Bus Line Unit)
800,32,"Asynch Transmitter/Receiver, KL11 (Various submodels exist)"
803,,Arbitration Control for MC11
807,2,"M7247, M105, M7821 on One Quad, EIA Only (DM11)"
810,6,M781 + M105 + M7821 on one Quad (Paper Tape Interface)
814,3,"8-Line 20MA Data Mux, 50 to 100K Baud DZ11-C, DZ11-D, DZ11-F"
819,3,DZ11-A 8 Line Dbl Buf Async EIA 50 to 96 Kbaud W 103A Modem Control
821,,Fast M7280 (Interrupt Control)
822,12,DU11
846,2,RX01 UNIBUS Interface
847,22,MS11 Memory (Various Submodels exist)
850,15,"MM11-BP, MM111-CP Parity Board for G651, MS-11-?P"
856,14,"DL11-W, SLU/RTC Option"
859,2,PDP-11/34 KY11-LB Console Interface (8008 CPU)
860,4,DR11-C = M786+M105+M7821
864,,DR11-L 2 Word UNIBUS Input Interface
867,,DUP11-DA SDLC or DDCMP Sync Interface
876,,PDP-11/60 KD11-K Timing
891,,MS11-L? (Varous Submodels Exist)
893,3,"DRS11, 48 outputs (Various submodels exist: TTL, Open Collector)"
894,,"DRS11, 48 Optical Isolated Outputs"
896,,"DRS11 48 Contact Sense Inputs (Submodels exist - 24V, 48V)"
903,,RK611 Data
904,,RK611 Drive Interface
908,,RK07 Track Position Detector
910,,M791+M105_M7821 Parallel Interface to LA30P
911,,"TMB11 Tabe Control 1, Hex"
921,,MA11-F Data Multiplexor
922,,MA11-F Address Multiplexor
923,,MA11-F Mux Control
930,2,M793+M105+M7821 Interface to Data Products line printers
944,2,MSV11-B 4K 16 Bit MOS
946,5,RXV11 Control
950,3,DRV11-B DMA 16 Bit Parallel Interface
951,2,DUV11-DA Sync Interface
952,,"KWV11-A LSI11 Bus, Programmable RTC"
955,3,MSV11-?D (Various Submodels Exist)
957,33,"DZV11, 4 Line Dlb Buf Async Mux EIA 50 - 10 K Baud W 103 Modem
Control"
958,,Q-Bus to I/O Daisy Chain Bus Control & Interface
982,,TS11 UNIBUS to Serial Bus Controller
983,2,MFS11-K Family Control
991,2,PCL11-B TXM (Transmitter) Interface
992,2,PCL11-B TXM UNIBUS Control
993,2,PCL11-B TXM Registers
994,2,PCL11-B TDM Bus Logic * Drivers
995,2,PCL11-B RCV (Receiver) Registers
996,2,PCL11-B RCV UNIBUS Control
997,2,"PCL11-B RCV Interface,"
On 8/13/2015 2:57 AM, Paul Anderson wrote:
Hi Pontus,
No, you probably didn't miss anything. I have several students working
for
me and they don't always get it. Sorry,
I'll try to correct it next week.
Thanks, Paul
On Thu, Aug 13, 2015 at 1:38 AM, Pontus Pihlgren <pontus at update.uu.se>
wrote:
> Hi
>
> Many interesting boards. I tried to identify them with the field guide:
> http://world.std.com/~mbg/pdp11-field-guide.txt
>
> But many numbers didn't exist there. For instance M7765 of which you
> have 15.
>
> Have I missed something?
>
> /P
>
> On Thu, Aug 13, 2015 at 12:42:53AM -0500, Paul Anderson wrote:
>> Sorry, this wasn't done the way i wanted. for the 2 digit numbers
place
> a
>> 70 in front, for the rest , just put a M7 in front.
>>
>>
>> On Thu, Aug 13, 2015 at 12:33 AM, Paul Anderson <useddec at gmail.com>
> wrote:
>>
>>> This might work better
>>>
>>>
>>>
>
https://drive.google.com/file/d/0B2MOaRm-6XKNV3hENS1Hd1lURXc/view?usp=shari…
>
> On Wed, Aug 12, 2015 at 11:58 PM, jwsmobile <jws at jwsss.com> wrote:
>
>>
>>
>> On 8/12/2015 8:26 PM, Paul Anderson wrote:
>>
>>> Thanks Jay,
>>>
>>> I was afraid i messed in up....
>>>
>>> On Wed, Aug 12, 2015 at 10:25 PM, Jay Jaeger <cube1 at charter.net>
wrote:
>>>
>>> When I visited this link, I ended up with a blank, white page.
>>>>
>>>> JRJ
>>>>
>>>> I get a blank page too, no action. Google drive shares don't leave
>> much you can adjust to try to fix links. The entire link got thru
fine,
>> but it isn't working.
>>
>> Maybe you need to make sure it is view, and public.
>>
>> thanks
>> Jim
>>
>>
>
12:05 p.m.
>> But many numbers didn't exist there. For
instance M7765 of which you
>> have 15.
http://www.tamayatech.com/partsindex/partM009.htm
fills in some of the M76xx/77xx holes
be careful, there are lots of other vendors in there too
12:44 p.m.
Hi Al,
once again I have high school kids doing things I can no longer do. I'll go
through the list next time they are here.
Thanks, Paul
On Thu, Aug 13, 2015 at 11:05 AM, Al Kossow <aek at bitsavers.org> wrote:
But many numbers didn't exist there. For instance M7765 of which you
>> have 15.
>>
>
http://www.tamayatech.com/partsindex/partM009.htm
fills in some of the M76xx/77xx holes
be careful, there are lots of other vendors in there too
3:55 p.m.
Hopefully that's M7762 ...
On Thu, Aug 13, 2015 at 12:05 PM, Al Kossow <aek at bitsavers.org> wrote:
--
Bill
vintagecomputer.net
>> But many numbers didn't exist there.
For instance M7765 of which you
>> have 15.
http://www.tamayatech.com/partsindex/partM009.htm
fills in some of the M76xx/77xx holes
be careful, there are lots of other vendors in there too
3267
days inactive
3267
days old
12 comments
6 participants
participants (6)
-
aek＠bitsavers.org -
billdegnan＠gmail.com -
cube1＠charter.net -
jws＠jwsss.com -
pontus＠Update.UU.SE -
useddec＠gmail.com