Hello All, Does anybody have some info on the Emulex SC311 interface card? It is a controller for 4 SMD devices, and I'm particulary interested in the switch settings of the 2 switch banks. I used it to access 2 Fujitsu's, but I got an Amcodyne 7110 drive which has 1 fixed and 1 removable cartridge. These are seen as 2 RK06's, lun 0 is the fixed drive, and lun 1 is the removable one. This drive came with a QBus Dilog SMD interface card (DQ215). I hooked the drive up on the Emulex, but I can only access the fixed drive lun 0 as DR0, not the removable lun. DR1 is not lun 1 unfortunately. Thanks, Ed -- The Wanderer | Politici zijn gore oplichters. quapla(a)xs4all.nl | Europarlementariers: zakkenvullers http://www.xs4all.nl/~quapla | en neuspeuteraars. Unix Lives! M$ Windows is rommel! | Kilometerheffing : De overheid '97 TL1000S | weet waar je bent geweest!