From: "R. D. Davis" <rdd(a)smarty.smart.net> When you get to a page like "http://www.seagate.com/support/disc/specs/st41200n.shtml", try following the link which says "A version of this specification with the linedraw characters approximated by text is available by clicking here." It takes you to a page like "http://www.seagate.com/cgi-bin/view.cgi?/scsi/st41200n.txt", which looks fine on my Netscape Navigator 3.03. Of course I'm running VMS, not UNIX, but I suspect that that matters little. For example: ST-41200N (94601-1200) Wren 7 SCSI and SCSI-2 +-- Some 16-pin configurations may not have these pins. | | +-----------------------------+ /-4-3-2-1-\ -----P-W-A-----+--+:::SCSI:Cable:::::::::::::::1+-+ 0 0 0 0 +-- +-+ | +-----------------------------+ +-5-G-G-12+ |o|o o o o o o(o)o +--------1+--------1+--------1 Power +o+o o o o o o(o)o +--------++--------++--------+ +-+ 4 2 1 M P | | Terminator Resistor SIPS | --+-- | | | | | | | | | +- Reserved | | | | +--- Motor Start Delay ( 16 sec * ID) | | | +----- Parity option enable | | +------- Motor Start option enable | +----------- Drive ID's, ID 0 (none) if only SCSI device +----------------+ Terminator power from Drive (vertical) + Terminator power from Bus (lower horizontal) ... ------------------------------------------------------------------------ Steven M. Schweda (+1) 651-645-9249 (voice, home) 1630 Marshall Avenue #8 (+1) 612-754-2636 (voice, work) Saint Paul MN 55104-6225 (+1) 612-754-6302 (facsimile, work) sms(a)antinode.org sms(a)provis.com (work)