I couldn't get them to display on my modern Window laptop, using either the Edge or Explorer browsers. I had to get my wife to show them to me on her Apple laptop. Not a great site to use for photos. Odd. The adapters on mine look _almost_ identical to yours, but _definitly_ have a #8 press fit threaded bushing at the bottom. Then there are a pair of holes in the folded-over bit, and a pair of machine screws go through superimposed holes in the flat part, and into tapped holes in the KY11-L bezel, which hold the adapter to the bezel. The 1" long #8 machine screw then holds the adapter to the tabs in the BA11-K. To do the other mounting hardware, in Henk's picture, there's a flat metal plate, with i) a hole in each end, and ii) a threaded hole in the middle. Two machine screws (#8, I thihk) hold the flat plate to the bezel, then another screw (#10, maybe) holds that U-shaped piece in Henk's picture to the flat piece, and then a pair of #10 screws hold that to the tabs in the BA11-K. (All machine screws above face forward.) Hey, it could be worse! :-) Has the classic computers commuinity lost anyone to COVID? I know we've lost a few in the last year, but I don't recall if any were COVID. Noel