15 Apr
2002
15 Apr
'02
11:40 a.m.
From: Ethan Dicks
--- David Woyciesjes <DAW(a)yalepress3.unipress.yale.edu> wrote:
Not surprised that DEC used different fasteners. Here is a larger
pic of what my fasteners looks like...
http://www.tt-ec.com/graphics/showcase/retaining/palunutmt.gif
... and it uses Philips-head screws for the mounting.
I'll try some of the auto/body shops around here, see if I can get a
decent price, otherwise Graybar (down the street from my house) should have
something...
--- David A Woyciesjes
--- C & IS Support Specialist
--- Yale University Press
--- mailto:david.woyciesjes@yale.edu
--- (203) 432-0953
--- ICQ # - 905818
Mac OS X 10.1.2 - Darwin Kernel Version 5.2: Fri Dec 7 21:39:35 PST 2001
Running since 01/22/2002 without a crash
Carl ---
That's close, but what I'm looking for clips around the rails, not
into the hole, which is round. This looks almost exactly like it, at the
bottom of the page...
"Palnut Multi-Thread U-Nut"
http://www.tt-ec.com/showcase/retaining/palunut.html
..that's it, I think...
That doesn't exactly resemble the ones I'm used to seeing - as mentioned,
the difference appears to be "bolt" vs "screw" fastening.
> From: Carl Lowenstein
>
> You would be happier with the type of fastener that uses real machine
> screws rather than the sheet-metal type screws that some racks have.
> There is a nice picture of them on the Tinnerman Web site at
>
> < http://www.tt-ec.com/showcase/nutbolt/nutretcat.html >
I've used plenty of these with modern racks, but since DEC racks have
round mounting holes, not square, the rack-mount nuts I have more
closely resemble these -
http://www.tt-ec.com/showcase/nutbolt/utype.html
... but with a u-shaped cutout to snap into place in a round hole.
-ethan
19 Apr
19 Apr
2:33 p.m.
Ok, I forget who exactly started this thread.
But, I asked Joe Moir (the DEC reseller who has been unfairly bashed
on this list reciently for asking if some of us were interested in
a VAX 11/785, and before that for a Prime computer), and being the
nice guy he is, he went and grabbed all the tinnerman nuts off of
a rack that was scheduled to be scrapped. He didnt charge me anything,
not even for shipping them to me.
So, I have 26 Tinnerman nuts, who wants em? They are the ones with
the metal bent into a flat C shape, with a nut attached.
-Lawrence LeMay
lemay(a)cs.umn.edu
From: Ethan
Dicks
--- David Woyciesjes <DAW(a)yalepress3.unipress.yale.edu> wrote:
Not surprised that DEC used different fasteners. Here is a larger
pic of what my fasteners looks like...
http://www.tt-ec.com/graphics/showcase/retaining/palunutmt.gif
... and it uses Philips-head screws for the mounting.
I'll try some of the auto/body shops around here, see if I can get a
decent price, otherwise Graybar (down the street from my house) should have
something...
--- David A Woyciesjes
--- C & IS Support Specialist
--- Yale University Press
--- mailto:david.woyciesjes@yale.edu
--- (203) 432-0953
--- ICQ # - 905818
Mac OS X 10.1.2 - Darwin Kernel Version 5.2: Fri Dec 7 21:39:35 PST 2001
Running since 01/22/2002 without a crash Carl ---
That's close, but what I'm looking for clips around the rails, not
into the hole, which is round. This looks almost exactly like it, at the
bottom of the page...
"Palnut Multi-Thread U-Nut"
http://www.tt-ec.com/showcase/retaining/palunut.html
..that's it, I think...
That doesn't exactly resemble the ones I'm used to seeing - as mentioned,
the difference appears to be "bolt" vs "screw" fastening.
> From: Carl Lowenstein
>
> You would be happier with the type of fastener that uses real machine
> screws rather than the sheet-metal type screws that some racks have.
> There is a nice picture of them on the Tinnerman Web site at
>
> < http://www.tt-ec.com/showcase/nutbolt/nutretcat.html >
I've used plenty of these with modern racks, but since DEC racks have
round mounting holes, not square, the rack-mount nuts I have more
closely resemble these -
http://www.tt-ec.com/showcase/nutbolt/utype.html
... but with a u-shaped cutout to snap into place in a round hole.
-ethan
8126
days inactive
8130
days old
1 comments
2 participants
participants (2)
-
DAW＠yalepress3.unipress.yale.edu -
lemay＠itlabs.umn.edu