18 May
1999
18 May
'99
6:07 p.m.
I would. I collect rotating memories,
and obscure interfaces thereto.
It is a small sub-speciality of mine. :^)
Jeff
On Tue, 18 May 1999 08:03:09 -0700 Mike Ford <mikeford(a)netwiz.net>
writes:
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
SMS was the
maker of a number of 8X300-based FDC's. These were about
10x12"
things with loads of TTL, normally bounted in a
17x18x15" (wxlxh)
cast
Most of what you say really rings a bell in my aging core stack,
except
that several of the cards were absolutely much larger than 10x12".
Second
point is would anybody want these?
19 May
19 May
6:05 a.m.
On Tue, 18 May 1999 jeff.kaneko(a)juno.com wrote:
I would. I collect rotating memories,
and obscure interfaces thereto.
It is a small sub-speciality of mine. :^)
Jeff,
Also an interest but I tend to be more focused. I'm looking for DRUM
memories of small physical size. I'm interested in getting one going
and I'm limited in space and power I'm willing to commit as I want to have
it run.
If you run across anything that may be on the Northeast I'd be interested.
Allison
9:23 a.m.
I would. I collect rotating memories,
and obscure interfaces thereto.
It is a small sub-speciality of mine. :^)
Jeff
On Tue, 18 May 1999 08:03:09 -0700 Mike Ford <mikeford(a)netwiz.net>
writes:
>>SMS was the maker of a number of 8X300-based FDC's. These were about
>10x12"
>>things with loads of TTL, normally bounted in a 17x18x15" (wxlxh)
I looked at a couple of these on Tuesday, and some do have the 8x300 chip,
but I didn't notice it on all of them, and a couple were labeled model 5001
(with a couple letters in front like FW or maybe FDC). The larger board
though had NO model number on it, the space was blank.
9192
days inactive
9193
days old
2 comments
3 participants
participants (3)
-
allisonp＠world.std.com -
jeff.kaneko＠juno.com -
mikeford＠netwiz.net