12 May
2016
12 May
'16
3:12 p.m.
From: Mattis Lind
I also have a YF card. ... I could access the contents
but it didn't
run very well. So either the CPU is still bad or the PROM contents are
bad. Could you please direct me to your YF dumps so I could compare?
They are on my "Miscellaneous Digital Equipment Corporation PDP-11
Information" page:
http://ana-3.lcs.mit.edu/~jnc/tech/pdp11/PDP-11_Stuff.html
in the "ROM Dumps" section.
If you also have done a disassembly that would be very
interesting.
I haven't completely disassembled the -YF version, but the -YA is almost all
done, so it should help.
Let me know if you need to have the -YF fully disassmbled & commented, and
I'll hop to it.
Noel
12 May
12 May
3:24 p.m.
2016-05-12 21:12 GMT+02:00 Noel Chiappa <jnc at mercury.lcs.mit.edu>:
Perfect! I'll have a look.
Very kind offer. It would be very nice with a listing if you have the time!
From: Mattis
Lind
I also have a YF card. ... I could access the
contents but it didn't
run very well. So either the CPU is still bad or the PROM contents
are
bad. Could you please direct me to your YF dumps
so I could compare?
They are on my "Miscellaneous Digital Equipment Corporation PDP-11
Information" page:
http://ana-3.lcs.mit.edu/~jnc/tech/pdp11/PDP-11_Stuff.html
in the "ROM Dumps" section.
If you also have done a disassembly that would be
very interesting.
I haven't completely disassembled the -YF version, but the -YA is almost
all
done, so it should help.
Let me know if you need to have the -YF fully disassmbled & commented, and
I'll hop to it.
Noel
/Mattis
3:54 p.m.
2016-05-12 21:24 GMT+02:00 Mattis Lind <mattislind at gmail.com>:
2016-05-12 21:12 GMT+02:00 Noel Chiappa <jnc at mercury.lcs.mit.edu>:
Perfect! I'll have a look.
Very kind offer. It would be very nice with a listing if you have the time!
I checked the contents in the machine versus your listing. Two locations
have the high bit set for some reason, 165020 read 100501 and 165032 reads
106303.
Trying to run halts the machine with 165102 in the front panel. Single
stepping it it will step to 165106 but become non-responsive with the
lights at 165106. I think this is because it had a bus fault. If I press
START it will clear it up.
So for now, it is not necessary with more disassembly. Unless you have som
spare time of course. The fault occur in the lines which you already have
done...
You don't have a dump of the PROMs in Intel HEX? I need to reprogram a new
chips since one seems to be failing.
/Mattis
From:
Mattis Lind
I also have a YF card. ... I could access the
contents but it didn't
run very well. So either the CPU is still bad or the PROM contents
are
bad. Could you please direct me to your YF dumps
so I could compare?
They are on my "Miscellaneous Digital Equipment Corporation PDP-11
Information" page:
http://ana-3.lcs.mit.edu/~jnc/tech/pdp11/PDP-11_Stuff.html
in the "ROM Dumps" section.
If you also have done a disassembly that would be
very interesting.
I haven't completely disassembled the -YF version, but the -YA is almost
all
done, so it should help.
Let me know if you need to have the -YF fully disassmbled & commented, and
I'll hop to it.
2998
days inactive
2998
days old
2 comments
2 participants
participants (2)
-
jnc＠mercury.lcs.mit.edu -
mattislind＠gmail.com