Since the 8272/765 does drive "polling", you have to connect DRIVE SELECT/ to DRIVE SELECT/. Connecting it to MOTOR ON/ would likely have some odd effects. Recall also, that the 765 can do overlapped seeks on multiple drives, which requires that the DRIVE SELECT/ line be what it says it is. Which leaves you with connecting HEAD LOAD/ to MOTOR ON/; not a good solution if you do a lot of multiple-drive operation (as CP/M floppy systems are wont to do). Better would be to use a timer to monitor the HEAD LOAD/ line and keep MOTOR ON/ active for a minute or so after the last drive activity. A (or a couple) of NE555's should do the trick. Recall that with the 55GFR, as the drive will not gate INDEX/ pulses until it's determined that the diskette's come up to speed. (This, BTW, is why hard-sector diskettes don't work in a 55GFR). So if you'r getting INDEX/ pulses, the drive, by definition, is ready. That's not to say that you couldn't get a GFR with a head-load solenoid, but they're pretty uncommon. My take anyway. Cheers, Chuck Cheers, Chuck