I picked up an ordinary Fujitso KB at a thrift shop that had an adapter on the end of the cable. It's a small plug and the only markings on it were the common I/O arrows on the business end. One side is the regular F 5-pin Din but the male side is about halfway between a regular din and a PS/2 sub. It is in a 6-pin configuration but the pins are much thinner than usual. It only has 4 pins which would square with the 5v, grnd, clock, data requirements but it could have a pin(s) broken off since they're fragile and protrude from the shell about 3/8". Clockwise the 1 and 3 are missing. There's no center lock. Anyone have any idea of what this might be for ? Lawrence lgwalker(a)mts.net bigwalk_ca(a)yahoo.com