At 10:02 AM 2/1/98 -0500, you wrote:
Assuming the drive's device number has not been
changed from eight, then the
correct command is LOAD "*", 8, 1
What's the differenct between "$" and "*"? I've seen both used
in this
context. How does one change a device number? I'm not Commodore expert. The
only other Commodore product I've had is a C-16, and that seems like ages ago.
changed to 9, 10, or 11, then you will get a
"device not found" error. Try
the other numbers in place of 8 until you find the correct one. If the
cable is bad or not connected properly, you should get a "device not
present" error.
I'll give it a try. How long should I wait for a device not present
message? It's just sitting there looking for the floppy. I've got both the
C-64 manual and the 1541 manual, but can't see anything that'll help me.
PS: I've got all kinds of 1541's if you really
want/need one.
I'd like to get a second drive if this one is good, or two drives if this
one is bad, but I think the problem is just me sitting in front of it, and
not the drive.
-John Higginbotham-
-limbo.netpath.net-