Sometimes decals don't last as long as we would like.
How can you replace them?
I picked this up from the Heathkit list:
From: "Ed Santavicca"
<santavic(a)ct.picker.com>
Subject: [HeathKit] dry-transfers
I finally found it!! It wasnt posted on the list at all. A co-worker
found it in the Digi-Key catalog, and told me about it several months ago.
(the mind goes 1st) Its a product made by DynaArt Designs and is called
the toner transfer system For $27.95 they supply 10 transfer sheets. It
can make full color decals too. This is their info.
DynaArt Designs
3535 Stillmeadow Lane
Lancaster, California 93536-6624
Phone: (805) 943-4746
FAX: (805) 943-3776
Digi-Key has a web site with an online catalog.
http://www.digikey.com/
Digi-Key's part numbers are:
TTS-5-ND (5 sheets per pack) $14.95
TTS-10-ND (10 sheets per pack) $27.95
These are intented to transfer pc layouts to copper clad
boards and the tranfers are etch resistant, but the ad says:
"Also (detailed instructions) show how to make full color
decals for any application".
Just use any laser printer or photocopier. (Sheet are 8 1/2" x 11")
Iron on to the surface, and soak in water to remove the paper.
=========================================
Doug Coward
Press Start Inc.
Sunnyvale,CA
=========================================