14 Feb
2017
14 Feb
'17
4:32 a.m.
From: Tony Duell
I find wire wrap wire to be the best thing (soldered
in place) to
repair or modify PCBs.
That's what DEC used for ECO's.
Noel
14 Feb
14 Feb
4:42 a.m.
For the record I was kidding about the alligator clips. My meaning is that
it's delicate work.
Bill
4:43 a.m.
________________________________________
From: cctalk [cctalk-bounces at classiccmp.org] on behalf of Noel Chiappa [jnc at
mercury.lcs.mit.edu]
Sent: Tuesday, February 14, 2017 7:32 AM
To: cctalk at classiccmp.org
Cc: jnc at mercury.lcs.mit.edu
Subject: Re: Changing wire-wrap configurations on DEC circuit boards
From: Tony Duell
I find wire wrap wire to be the best thing (soldered
in place) to
repair or modify PCBs.
That's what DEC used for ECO's.
Noel
I was going to say the same thing, but you beat me too it. :-)
bill
6:43 a.m.
On Feb 14, 2017, at 7:32 AM, Noel Chiappa <jnc at
mercury.lcs.mit.edu> wrote:
My experience is that people still do so today. Soldered in place, and held along the way
by small drops of superglue.
paul
From: Tony Duell
I find wire wrap wire to be the best thing
(soldered in place) to
repair or modify PCBs.
That's what DEC used for ECO's.
2868
days inactive
2868
days old
3 comments
4 participants
participants (4)
-
bill.gunshannon＠hotmail.com -
billdegnan＠gmail.com -
jnc＠mercury.lcs.mit.edu -
paulkoning＠comcast.net