From: redodd at comcast.net> To: cctalk at classiccmp.org> Date: Fri, 14 Sep 2007 20:22:26 -0400> Subject: Kaypro movcpm.com> > Hello Kaypro fans,> > I'd like to put a Kayplus83 rom into a Kaypro II so I can add double sided drives and have all the other nice stuff that the rom provides. It's the early model with an 81-110B1 motherboard that needs the wiring for the floppy side 2 added. The Advent Turborom manual has the wiring mods needed for side 2 access. The Kaypro II comes with a 2K eprom and the Kayplus83 is an 8K. Again the Turborom manual tells how to access a 4K rom and adding access to the A12 line should make the 8K rom work. I think that I've got that part all worked out. To make the Kayplus boot disk, you have to have a system size of 62K or smaller. My Kaypro II disk has a 64K system. When I run movcpm.com to change the system size, the program hangs. I also tried the version of movcpm that comes with the Kaypro 4 and that hangs also. So question (1) is, has anyone gotten this program to work or is there another easy way to do this? There's a blurb on the net about the Kaypro 1 movcpm not working right but I didn't see anything about the Kaypro II version. Question (2) is, should the movcpm program from another Kaypro model work on a II or are they all specific to 1 model. TIA.> > Ralph

From: redodd at comcast.net> To: cctalk at classiccmp.org> Date: Fri, 14 Sep 2007 20:22:26 -0400> Subject: Kaypro movcpm.com> > Hello Kaypro fans,> > I'd like to put a Kayplus83 rom into a Kaypro II so I can add double sided drives and have all the other nice stuff that the rom provides. It's the early model with an 81-110B1 motherboard that needs the wiring for the floppy side 2 added. The Advent Turborom manual has the wiring mods needed for side 2 access. The Kaypro II comes with a 2K eprom and the Kayplus83 is an 8K. Again the Turborom manual tells how to access a 4K rom and adding access to the A12 line should make the 8K rom work. I think that I've got that part all worked out. To make the Kayplus boot disk, you have to have a system size of 62K or smaller. My Kaypro II disk has a 64K system. When I run movcpm.com to change the system size, the program hangs. I also tried the version of movcpm that comes with the Kaypro 4 and that hangs also. So question (1) is, has anyone gotten this program to work or is there another easy way to do this? There's a blurb on the net about the Kaypro 1 movcpm not working right but I didn't see anything about the Kaypro II version. Question (2) is, should the movcpm program from another Kaypro model work on a II or are they all specific to 1 model. TIA.> > Ralph