4 Dec
1999
4 Dec
'99
8:51 a.m.
<1) There are lots of resources out there featuring VAX information; you mig
<look at the NetBSD/vax port website (http://www.netbsd.org/Ports), the VAXa
<(http://vaxarchive.org), and Hamster's Digital Resources site, which can be
<http://www.telnet.hu/hamster/dr.
Yes many of them are excellent!
<2) I don't believe there is any sort of hobbyist distribution of Ultrix, ho
Ultrix was never released and I suspect never will. My guess is it has a
lot of the ATT/BSD code that was encumbered.
<3) All microVAX systems use some variety of serial terminal for a system co
<(although I believe it has to be VT100 compatible, so I'm not sure how usef
<ADM terminal will be). VAXstation systems are the ones that use monitors a
<consoles, however it is possible to get them to run over a serial console a
<using a few different methods depending on which model you have.
For those that don't have a video console the terminal only has to be
serial 9600/8/n/1 and supports Xon/Xoff meaning most anything works though
some aren't pretty. The terminal can be hard copy such as the LA100KSR.
Allison
4 Dec
4 Dec
9:20 a.m.
Rumor has it that Allison J Parent may have mentioned these words:
<1) There are lots of resources out there featuring
VAX information; you mig
<look at the NetBSD/vax port website (http://www.netbsd.org/Ports), the VAXa
<(http://vaxarchive.org), and Hamster's Digital Resources site, which can be
<http://www.telnet.hu/hamster/dr.
Yes many of them are excellent!
Thanks - I have lots of stuff to read now in my already overloaded
weekend... ;-) I'll be building outbuildings most of tomorrow, so when I'm
ready for a break, I'll be putting that 12ppm laser printer I now own to
good use... ;^>
<2) I don't believe there is any sort of
hobbyist distribution of Ultrix, ho
Ultrix was never released and I suspect never will. My guess is it has a
lot of the ATT/BSD code that was encumbered.
Well, I guess if I wanna run Ultrix, I had better hope there's media with
the box... This box may be semi-production, and I don't want to rely on
anything that I can't fix. So if Ultrix doesn't happen, VMS will.
<3) All microVAX systems use some variety of serial
terminal for a system co
<(although I believe it has to be VT100 compatible, so I'm not sure how usef
<ADM terminal will be). VAXstation systems are the ones that use monitors a
<consoles, however it is possible to get them to run over a serial console a
<using a few different methods depending on which model you have.
For those that don't have a video console the terminal only has to be
serial 9600/8/n/1 and supports Xon/Xoff meaning most anything works though
some aren't pretty. The terminal can be hard copy such as the LA100KSR.
So I could go hell-bent with my Tandy 200 if necessary... ;-) I "popped
the lid" on one of my ADM's - and it's more than just a terminal, if you
know what to do with it. It's 6800 based with IIRC a Moto 6845 character
generator, a little RAM & 2 or 3 ROMS... All I'd need is the source, and a
x-assembler for a CoCo (6809-based), hack in some more RAM and I can turn
one of them into whatever I darned well please... ;-) (The other I'll keep
stock, but a guy's gotta *play*, ya know?)
Thanks again, everybody...
Roger "Merch" Merchberger
--
Roger "Merch" Merchberger --- sysadmin, Iceberg Computers
Recycling is good, right??? Ok, so I'll recycle an old .sig.
If at first you don't succeed, nuclear warhead
disarmament should *not* be your first career choice.
1:03 p.m.
On Sat, 4 Dec 1999, Allison J Parent wrote:
<2) I don't believe there is any sort of
hobbyist distribution of Ultrix, ho
Ultrix was never released and I suspect never will. My guess is it has a
lot of the ATT/BSD code that was encumbered.
Since a license for ATT source code is now available from SCO unix for
$100, perhaps DEC can be convinced to release Ultrix as well.
Unfortunately, I have no idea how one would go about it...
Allison
3:24 p.m.
Given DEC's attitude and price for the Ultrix y2k update a hobbyist
version seems unlikely.
On the other side, I was able to download the AIX 4.1.5 Y2k update for
free from IBM, and that is a live operating system.
Now only my DECsystem 5400 (ultrix) remains Y2k unready.
Paul
On Sat, 4 Dec 1999, Clint Wolff (VAX collector) wrote:
On Sat, 4 Dec 1999, Allison J Parent wrote:
<2) I don't believe there is any sort of
hobbyist distribution of Ultrix, ho
Ultrix was never released and I suspect never will. My guess is it has a
lot of the ATT/BSD code that was encumbered.
Since a license for ATT source code is now available from SCO unix for
$100, perhaps DEC can be convinced to release Ultrix as well.
Unfortunately, I have no idea how one would go about it...
Allison
8992
days inactive
8992
days old
3 comments
4 participants
participants (4)
-
allisonp＠world.std.com -
thompson＠mail.athenet.net -
vaxman＠uswest.net -
zmerch＠30below.com