Freight recommendation for a teletype? - test-drb@ccmp.vtda.org

17 Aug 2015

Hi John,

A testament to the extraordinary community that is classiccmp.

I
 will certainly take you up on it, and get you a check, and/or some of 
the other great junk lying around here.  I'm pretty well equipped with a
 good electronics lab.  Do you need a scope?  I have a few Tektronix 
digital scopes and I cant possibly use them all.  100 MHz ....

I'm
 not sure about the lockdown, I imagine when its undone the bolt is 
stored in a available hole inside, and possibly is still there.

I
 will see what comes back from craters and freighters and UShip, the 
thing has to be taken off the pedestal  and wrapped/banded onto a 
pallet.

Let me know what you need, and hey,

Thanks,

Randy

...
  Date: Mon, 17 Aug 2015 21:49:59 -0500
 To: rdawson16 at hotmail.com
 From: jfoust at threedee.com
 Subject: RE: Freight recommendation for a teletype?

 At 09:29 PM 8/17/2015, you wrote:
 123 N Washington St. Elkhorn WI 53121.
I asked for a quote from Craters and Freighters, and the UShip site.  
 I'm not sure if I can help, but I thought I'd chime in.

 I'm 45 minutes from there, 30 minutes if I'm at my fianc?e's place.
 (Jefferson, WI and Janesville, WI, respectively.)

 I do have a friend with a loading dock and pallets and wrap.

 You do need to lock down the upper machinery with the shipping bolt
 or it'll destroy itself, depending on the shipping method.

 I have a 33 and a 28, too.

 - John