17 May
2016
17 May
'16
2:11 a.m.
Once in the day I thought Inmos and their transputer family was quite
interesting. I had an idea of doing som sort of project. But of course
there were no real time to be found to do anything (not sure if this has
changed today).
While browsing for something else I found someone at Ebay in Germany
selling T400 in 68 pin PLCC.
http://www.ebay.de/itm/131355196522
Are there tools (Occam etc) around to do anything with these today?
/Mattis
17 May
17 May
9:56 a.m.
On 2016-05-17 2:11 AM, Mattis Lind wrote:
Once in the day I thought Inmos and their transputer
family was quite
interesting. I had an idea of doing som sort of project. But of course
there were no real time to be found to do anything (not sure if this has
changed today).
While browsing for something else I found someone at Ebay in Germany
selling T400 in 68 pin PLCC.
http://www.ebay.de/itm/131355196522
They do come up from time to time. A lot of 38 T800s(?) was sold recently.
Are there tools (Occam etc) around to do anything with these today?
Yes, quite a few are archived on Ram's site:
http://www.classiccmp.org/transputer/
I've also long been interested in a Transputer SBC project, having used
them back in the late 1980s. While the Transputer requires very little
supporting circuitry you might want to pick up a C011 (I'm not an expert
and haven't built an SBC - this was advice from Dave McGuire).
--Toby
/Mattis
11:30 a.m.
On Tue, 17 May 2016, Mattis Lind wrote:
Once in the day I thought Inmos and their transputer
family was quite
interesting. I had an idea of doing som sort of project. But of course
there were no real time to be found to do anything (not sure if this has
changed today).
While browsing for something else I found someone at Ebay in Germany
selling T400 in 68 pin PLCC.
http://www.ebay.de/itm/131355196522
Are there tools (Occam etc) around to do anything with these today?
/Mattis
Nice! I'd probably pick up a few of them if a seller here in the US had a
similar deal going ... if only to have an example of them. That said, I
know there's plenty of hobbyist interest in them and I bet you'd be able
to rustle up some tools without too much trouble. Go for it :O
Best,
Sean
2988
days inactive
2988
days old
2 comments
3 participants
participants (3)
-
mattislind＠gmail.com -
scaron＠diablonet.net -
toby＠telegraphics.com.au