Hello! I have a vax related board. It takes 6 x 72pin simms, on board SCSI run by NCR 53C94, and TP ethernet connection via 15pin D-connector. It uses standard DEC keyboards for it. It has pair of 40 pin ROM chips. Plugged into this small motnerboard as a daughterboard is 1mb VRAM with sound chip and it has Bt458LPJ125 RAMDAC chip feeding to D-shell with 3 coax connectors in it (sync on green), dual "phone" jacks with one "reset" button. It has 8 yellow diagnostic LEDs. Time of year, made around '90. It has label sticker: AB15102Y6U etched into board is GS-2 32491-(sticker says: E02) I think it's a vax type board but not exactly sure what exactly model it was? Type of box that I seen with this board was "pizza box" with no removeable media just a internal hard drive, the PSU is in long box with two small fans side to side in it. (Wished I could kept one of this chassis to house this board.) :( Thinking of putting Linux on it if there is a different daughterboards for it with removeable media/video/sound or whatever! Thanks! Jason D.