ah yes, the first ps1 series to come out. i presume its a 2011-c34 or m01. you might want to try this trick: with the machine off, press and hold down both mouse buttons, then power on. when it posts, let the buttons go. that will force an autoconfig, and make it boot from rom again. that trick works on all ps1 models. you shoulda made your disk backups when it was running, but too late now. you can still order the core software from ibm. i think it's ~$45. ring the helpcentre at 800.772.2227 david In a message dated 98-02-03 16:55:21 EST, you write: << I recently came into possession of a PS/1 model 2011. (I believe that this was one of the initial PS/1 models). It has a '286 processor and 30 meg harddrive. Unfortunately, the harddrive seems to be DOA (1701 error on boot up). The system will boot up to a 4 quadrant screen from the rom. I have downloaded the programs from IBM to switch the boot sequence to the floppy, but I cannot access any of the software that came with the system (MS Works et al.). The docs seem to imply that I can create a diskette version to run the software, which would be great if I had the original diskettes. So I'm wondering if there is anyone out there that I could get a copy of the diskettes that came with this system? Thanks, >>