23 May
2002
23 May
'02
8:01 p.m.
I need an EDAC connector for the DEC CR-11 (Documation M200) punch card
reader I am trying to interface.
This is 1-5/8" wide by 3/4" high. It has 37 conductors and is of the
female persuasion. I need it's male counterpart to breed it.
Does anyone have a spare/know of a source?
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
* Old computing resources for business and academia at www.VintageTech.com *
23 May
23 May
8:57 p.m.
On Thu, 23 May 2002, Sellam Ismail wrote:
I need an EDAC connector for the DEC CR-11 (Documation
M200) punch
card reader I am trying to interface.
This is 1-5/8" wide by 3/4" high. It has 37 conductors and is of the
female persuasion. I need it's male counterpart to breed it.
Does anyone have a spare/know of a source?
Have a picture? I have some odd stuff stored away and could take a look,
but I don't know what to look for.
-Toth
24 May
24 May
5:58 a.m.
On Fri, 24 May 2002, Tothwolf wrote:
On Thu, 23 May 2002, Sellam Ismail wrote:
Sure. Here it is:
http://www.siconic.com/crap/edac.jpg
The big hole in the middle is where a screw goes to clamp the cable ends
together. The "pins" are actually flat and horizontally oriented. If you
have a connector with round pins (and especially no hole in the middle)
that is NOT what I am looking for.
Thanks!
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
* Old computing resources for business and academia at www.VintageTech.com *
I need an EDAC connector for the DEC CR-11
(Documation M200) punch
card reader I am trying to interface.
This is 1-5/8" wide by 3/4" high. It has 37 conductors and is of the
female persuasion. I need it's male counterpart to breed it.
Does anyone have a spare/know of a source?
Have a picture? I have some odd stuff stored away and could take a look,
but I don't know what to look for. 
6:13 a.m.
It would appear to have 38 pins, not 37 and looks like it would mate
with 516-038-000-301 from http://www.audiogear.com/EdcELco.html for
$8.15, plus cover shell (if desired).
--tom
At 07:58 AM 5/24/02 -0700, you wrote:
On Fri, 24 May 2002, Tothwolf wrote:
Festival
On Thu, 23 May 2002, Sellam Ismail wrote:
Sure. Here it is:
http://www.siconic.com/crap/edac.jpg
The big hole in the middle is where a screw goes to clamp the cable ends
together. The "pins" are actually flat and horizontally oriented. If you
have a connector with round pins (and especially no hole in the middle)
that is NOT what I am looking for.
Thanks!
Sellam Ismail Vintage Computer I need an EDAC connector for the DEC CR-11
(Documation M200) punch
card reader I am trying to interface.
This is 1-5/8" wide by 3/4" high. It has 37 conductors and is of the
female persuasion. I need it's male counterpart to breed it.
Does anyone have a spare/know of a source?
Have a picture? I have some odd stuff stored away and could take a look,
but I don't know what to look for.
---------------------------------------------------------------------------
---
International Man of Intrigue and Danger
http://www.vintage.org
* Old computing resources for business and academia at www.VintageTech.com *
7:37 a.m.
Tom,
since one of the 38-pin pictures is already missing from the Web page, I
guess Sellam has meanwhile picked up everything he needed ;-)
(Carefully checking again if this goes to CCTALK, not CCTECH, and
ducking...)
Andreas
Tom Uban wrote:
It would appear to have 38 pins, not 37 and looks like it would mate
with 516-038-000-301 from http://www.audiogear.com/EdcELco.html for
$8.15, plus cover shell (if desired).
--tom
At 07:58 AM 5/24/02 -0700, you wrote:
--
Andreas Freiherr
Vishay Semiconductor GmbH, Heilbronn, Germany
http://www.vishay.com
On Fri, 24 May 2002, Tothwolf wrote:
Festival
On Thu, 23 May 2002, Sellam Ismail wrote:
Sure. Here it is:
http://www.siconic.com/crap/edac.jpg
The big hole in the middle is where a screw goes to clamp the cable ends
together. The "pins" are actually flat and horizontally oriented. If you
have a connector with round pins (and especially no hole in the middle)
that is NOT what I am looking for.
Thanks!
Sellam Ismail Vintage Computer I need an EDAC connector for the DEC CR-11
(Documation M200) punch
card reader I am trying to interface.
This is 1-5/8" wide by 3/4" high. It has 37 conductors and is of the
female persuasion. I need it's male counterpart to breed it.
Does anyone have a spare/know of a source?
Have a picture? I have some odd stuff stored away and could take a look,
but I don't know what to look for.
---------------------------------------------------------------------------
---
International Man of Intrigue and Danger
http://www.vintage.org
>
> * Old computing resources for business and academia at www.VintageTech.com *
>
>
>
3:55 p.m.
On Fri, 24 May 2002, Sellam Ismail wrote:
http://www.siconic.com/crap/edac.jpg
The big hole in the middle is where a screw goes to clamp the cable
ends together. The "pins" are actually flat and horizontally
oriented. If you have a connector with round pins (and especially no
hole in the middle) that is NOT what I am looking for.
I thought I had seen these before...the JC80 system I'm trying to restore
uses these for its bus interconnect. I think the ones it uses have more
pins though. There are a couple of local surplus shops that might have
such connectors, but it looks like you already found a source.
Speaking of which, if someone comes across JC80/85 parts (the boards in
the 80 are mostly all wirewrap in hinged metal frames), drop me an email.
I don't have anywhere near a complete system yet, but I almost have a
complete CPU/network assembly (minus one WW board.)
-Toth
6:20 p.m.
On Fri, 24 May 2002, Tothwolf wrote:
I thought I had seen these before...the JC80 system
I'm trying to
restore uses these for its bus interconnect. I think the ones it uses
have more pins though. There are a couple of local surplus shops that
might have such connectors, but it looks like you already found a
source.
If you could look anyway then I'd appreciate it. The ones on the website
Tom referred require wiring. I'd rather just take an existing cable, cut
it, and hack the conductors into the device I'm building. I'm lazy.
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
* Old computing resources for business and academia at www.VintageTech.com *
5:06 a.m.
Sellam,
Try here:
http://www.audiogear.com/EdcELco.html
--tom
At 10:01 PM 5/23/02 -0700, Sellam Ismail wrote:
I need an EDAC connector for the DEC CR-11 (Documation M200) punch card
reader I am trying to interface.
This is 1-5/8" wide by 3/4" high. It has 37 conductors and is of the
female persuasion. I need it's male counterpart to breed it.
Does anyone have a spare/know of a source?
Sellam Ismail Vintage Computer
Festival
---------------------------------------------------------------------------
---
International Man of Intrigue and Danger
http://www.vintage.org
* Old computing resources for business and academia at www.VintageTech.com *
6:06 a.m.
On Fri, 24 May 2002, Tom Uban wrote:
Sellam,
Try here:
http://www.audiogear.com/EdcELco.html
Ah, much better. But what about the connector assembly pins & wires?
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
* Old computing resources for business and academia at www.VintageTech.com *
8096
days inactive
8096
days old
8 comments
4 participants
participants (4)
-
Andreas.Freiherr＠Vishay.com -
foo＠siconic.com -
tothwolf＠concentric.net -
uban＠ubanproductions.com