16 Mar
2019
16 Mar
'19
3:29 a.m.
I have been experimenting with a SCSI21SD V6 card trying to get it to work
on a VAX 4000-200 running VMS 5.4 using a KZQSA. It seems to recognise that
there is a SCSI device there, but any attempt to access the device from VMS
5.4 results in a Fatal Drive Error. I tried booting a VMS 7.3 image from the
SCSI2SD card and that worked.
Obviously I have played with some of the settings, like SCSI2 mode etc, but
I have not found anything that works. Has anyone succeeded in getting this
board to work on VMS 5.4?
Thanks
Rob
16 Mar
16 Mar
3:41 a.m.
Rob,
Might be an issue with the card. The KZQSA was officially only supported
for CD-ROM and Tape.
http://www.microvax2.org/files/KZQSA%20Jumper%20Settings.htm
(towards the bottom)...
... have you tried with a real SCSI drive?
Dave
-----Original Message-----
From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Rob Jarratt via
cctalk
Sent: 16 March 2019 10:29
To: General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org>
Subject: SCSI2SD on VMS 5.4
I have been experimenting with a SCSI21SD V6 card trying to get it to work
on
a VAX 4000-200 running VMS 5.4 using a KZQSA. It seems
to recognise that
there is a SCSI device there, but any attempt to access the device from
VMS
5.4 results in a Fatal Drive Error. I tried booting a
VMS 7.3 image from
the
SCSI2SD card and that worked.
Obviously I have played with some of the settings, like SCSI2 mode etc,
but I
have not found anything that works. Has anyone
succeeded in getting this
board to work on VMS 5.4?
Thanks
Rob
3:48 a.m.
[https://tr.cloudmagic.com/h/v6/emailtag/tag/2.0/1552733316/85fc1846b5a97261…]
Why not try dd if working real disk of to SD card ?
On Sat, Mar 16, 2019 at 6:41pm, Dave Wade via cctalk <cctalk at
classiccmp.org<mailto:cctalk at classiccmp.org>> wrote:
Rob,
Might be an issue with the card. The KZQSA was officially only supported
for CD-ROM and Tape.
http://www.microvax2.org/files/KZQSA%20Jumper%20Settings.htm
(towards the bottom)...
... have you tried with a real SCSI drive?
Dave
-----Original Message-----
From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Rob Jarratt via
cctalk
Sent: 16 March 2019 10:29
To: General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org>
Subject: SCSI2SD on VMS 5.4
I have been experimenting with a SCSI21SD V6 card trying to get it to work
on
a VAX 4000-200 running VMS 5.4 using a KZQSA. It seems
to recognise that
there is a SCSI device there, but any attempt to access the device from
VMS
5.4 results in a Fatal Drive Error. I tried booting a
VMS 7.3 image from
the
SCSI2SD card and that worked.
Obviously I have played with some of the settings, like SCSI2 mode etc,
but I
have not found anything that works. Has anyone
succeeded in getting this
board to work on VMS 5.4?
Thanks
Rob
4:21 a.m.
-----Original Message-----
From: Dave Wade <dave.g4ugm at gmail.com>
Sent: 16 March 2019 10:41
To: rob at jarratt.me.uk; 'Rob Jarratt' <robert.jarratt at ntlworld.com>;
'General
Discussion: On-Topic and Off-Topic Posts'
<cctalk at classiccmp.org>
Subject: RE: SCSI2SD on VMS 5.4
Rob,
Might be an issue with the card. The KZQSA was officially only supported
for
CD-ROM and Tape.
http://www.microvax2.org/files/KZQSA%20Jumper%20Settings.htm
(towards the bottom)...
... have you tried with a real SCSI drive?
I thought I remembered something like that but I couldn't find the info.
Thanks for the reminder. I suspect VMS 7.3 maybe works with hard disks on
KZQSA whereas 5.4 perhaps does not. I may try to emulate a CD-ROM to see if
that at least works.
Thanks
Rob
1891
days inactive
1891
days old
3 comments
3 participants
participants (3)
-
dave.g4ugm＠gmail.com -
kevin＠knlag.com -
robert.jarratt＠ntlworld.com