Intel MDS 225 (1st post) - test-drb@ccmp.vtda.org

14 Oct 2000

From: Joe &lt;rigdonj(a)intellistar.net&gt;
...
    That should be EASY to do by using the ROM monitor.
You shouldn't even
...
 need OS software to do it. The monitor command R0 reads
from the paper tape
...
 port. I imagine that you could use another device to
input data there
instead of the PT reader. You could then use the monitor commands to write

I did it that way for my first V2.2 port, used punch out to push it into
my box.
The "catch" code was 30 or so bytes.  The source system was MDS-230.

The box I'd used for target was a Multibus design using a set of cards
I still have and a BLC80/10 with the memory map modded.

Allison