21 Jan
2018
21 Jan
'18
7:22 a.m.
Is there any interest or value in copies of SR7.0 "Aegis"
or should I just scratch them and add them to my other 8"
disks? (Yes, I used to have an Apollo in my house!! Made
a great heater during those long cold winters.)
bill
21 Jan
21 Jan
8 a.m.
On 2018-01-21 10:22 AM, Bill Gunshannon via cctalk wrote:
Is there any interest or value in copies of SR7.0
"Aegis"
or should I just scratch them and add them to my other 8"
disks? (Yes, I used to have an Apollo in my house!! Made
a great heater during those long cold winters.)
I vote for imaging and archiving ... Apollo material is rare and hard to
find afaik.
What hardware is that compatible with?
--Toby
bill
9:36 a.m.
I don't have the equipment to image them. I do have PDP-11's that can always use
another 8" disk. I don't remember what model they are from I got rid of that
machine
over 20 years ago. Just trying to find out if they are worth trying to sell or just
repurpose.
bill
________________________________
From: Toby Thain <toby at telegraphics.com.au>
Sent: Sunday, January 21, 2018 11:00 AM
To: Bill Gunshannon; General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Apollo Software
On 2018-01-21 10:22 AM, Bill Gunshannon via cctalk wrote:
Is there any interest or value in copies of SR7.0
"Aegis"
or should I just scratch them and add them to my other 8"
disks? (Yes, I used to have an Apollo in my house!! Made
a great heater during those long cold winters.)
I vote for imaging and archiving ... Apollo material is rare and hard to
find afaik.
What hardware is that compatible with?
--Toby
bill
9:50 a.m.
On 1/21/2018 7:22 AM, Bill Gunshannon via cctalk wrote:
Is there any interest or value in copies of SR7.0
"Aegis"
or should I just scratch them and add them to my other 8"
disks? (Yes, I used to have an Apollo in my house!! Made
a great heater during those long cold winters.)
bill
Definitely worth saving.? I have facilities for imaging these and I'd be
happy to take them on, if no one else is excited to do so :).
- Josh
11:42 a.m.
The HP Computer Museum would be happy to host copies of any Apollo software if it can be
imaged..
David Collins
Sent from my iPad
On 22 Jan 2018, at 4:50 am, Josh Dersch via cctalk
<cctalk at classiccmp.org> wrote:
On 1/21/2018 7:22 AM, Bill Gunshannon via cctalk
wrote:
Is there any interest or value in copies of SR7.0 "Aegis"
or should I just scratch them and add them to my other 8"
disks? (Yes, I used to have an Apollo in my house!! Made
a great heater during those long cold winters.)
bill
Definitely worth saving. I have facilities for imaging these and I'd be happy to
take them on, if no one else is excited to do so :).
- Josh 
11:54 a.m.
On Jan 21, 2018, at 2:50 PM, Al Kossow via cctalk
<cctalk at classiccmp.org> wrote:
CHM has an agreement with HP to host Apollo and 68K HP 9000 software legally.
On 1/21/18 11:42 AM, David Collins via cctalk wrote:
I just dawned on me that the subject is Apollo the company bought by HP, not Apollo the
spacecraft. Oh well...
paul
The HP Computer Museum would be happy to host
copies of any Apollo software if it can be imaged..
7:16 p.m.
I wasn't aware of that. I have a ton of Apollo QIC images. Shall I put
them up on my Google Drive for you to grab?
On 1/21/2018 1:50 PM, Al Kossow via cctalk wrote:
CHM has an agreement with HP to host Apollo and 68K HP
9000 software legally.
On 1/21/18 11:42 AM, David Collins via cctalk wrote:
The HP Computer Museum would be happy to host
copies of any Apollo software if it can be imaged..
22 Jan
22 Jan
8:57 a.m.
sure thing.
we got boxed of tapes and about 100 esdi disks from the support development cluster I
haven't
had time to do anything with
also, i have lots of the last couple of revs of manuals up on bitsavers and there is a
functional
Apollo emulator running in MAME
On 1/21/18 7:16 PM, Jay Jaeger via cctalk wrote:
I wasn't aware of that. I have a ton of Apollo
QIC images. Shall I put
them up on my Google Drive for you to grab?
On 1/21/2018 1:50 PM, Al Kossow via cctalk wrote:
> CHM has an agreement with HP to host Apollo and 68K HP 9000 software legally.
>
>
> On 1/21/18 11:42 AM, David Collins via cctalk wrote:
>> The HP Computer Museum would be happy to host copies of any Apollo software if it
can be imaged..
>
>
24 Jan
24 Jan
6:42 a.m.
OK. Should have a link for you today or tomorrow. I want to do an MD5
checsum of all of it because there are a lot of duplicates.
On 1/22/2018 10:57 AM, Al Kossow via cctalk wrote:
sure thing.
we got boxed of tapes and about 100 esdi disks from the support development cluster I
haven't
had time to do anything with
also, i have lots of the last couple of revs of manuals up on bitsavers and there is a
functional
Apollo emulator running in MAME
On 1/21/18 7:16 PM, Jay Jaeger via cctalk wrote:
I wasn't aware of that. I have a ton of
Apollo QIC images. Shall I put
them up on my Google Drive for you to grab?
On 1/21/2018 1:50 PM, Al Kossow via cctalk wrote:
> CHM has an agreement with HP to host Apollo and 68K HP 9000 software legally.
>
>
> On 1/21/18 11:42 AM, David Collins via cctalk wrote:
>> The HP Computer Museum would be happy to host copies of any Apollo software if it
can be imaged..
>
>
9:41 a.m.
If you still have the disks, scanning the labels would be a good thing
On 1/24/18 6:42 AM, Jay Jaeger via cctalk wrote:
OK. Should have a link for you today or tomorrow. I
want to do an MD5
checsum of all of it because there are a lot of duplicates.
On 1/22/2018 10:57 AM, Al Kossow via cctalk wrote:
> sure thing.
> we got boxed of tapes and about 100 esdi disks from the support development cluster I
haven't
> had time to do anything with
>
> also, i have lots of the last couple of revs of manuals up on bitsavers and there is
a functional
> Apollo emulator running in MAME
>
>
>
> On 1/21/18 7:16 PM, Jay Jaeger via cctalk wrote:
>> I wasn't aware of that. I have a ton of Apollo QIC images. Shall I put
>> them up on my Google Drive for you to grab?
>>
>> On 1/21/2018 1:50 PM, Al Kossow via cctalk wrote:
>>> CHM has an agreement with HP to host Apollo and 68K HP 9000 software
legally.
>>>
>>>
>>> On 1/21/18 11:42 AM, David Collins via cctalk wrote:
>>>> The HP Computer Museum would be happy to host copies of any Apollo
software if it can be imaged..
>>>
>>>
>
>
8:31 a.m.
Al, the tape images have been uploaded to:
https://drive.google.com/open?id=1AbOOHQjssPPEterpJLCP6A3S50K97rp_
Which is a subdirectory (bits/Apollo) in
https://drive.google.com/open?id=0B2v4WRwISEQRWWFFdVpCZWFTZEU
Unfortunately, my Aegis SR9.7 had errors (I had forgotten that).
As the readme explains, I read each one twice where I could (once on an
actual Apollo, and a second time on Linux), and compared them, and then
took one set (SR10.2, I think), and installed them on the MESS (now
apparently subsumed within MAME - I did this work several years ago)
simulator to make sure the process actually worked.
JRJ
On 1/22/2018 10:57 AM, Al Kossow via cctalk wrote:
sure thing.
we got boxed of tapes and about 100 esdi disks from the support development cluster I
haven't
had time to do anything with
also, i have lots of the last couple of revs of manuals up on bitsavers and there is a
functional
Apollo emulator running in MAME
On 1/21/18 7:16 PM, Jay Jaeger via cctalk wrote:
I wasn't aware of that. I have a ton of
Apollo QIC images. Shall I put
them up on my Google Drive for you to grab?
On 1/21/2018 1:50 PM, Al Kossow via cctalk wrote:
> CHM has an agreement with HP to host Apollo and 68K HP 9000 software legally.
>
>
> On 1/21/18 11:42 AM, David Collins via cctalk wrote:
>> The HP Computer Museum would be happy to host copies of any Apollo software if it
can be imaged..
>
>
21 Jan
21 Jan
5:59 p.m.
Definitely interested here Bill - I've got 3 Apollos from a rescue - have the
machines and all the token ring gear but no manuals
or software - as yet have to fire them up but anything Aegis related is of interest to
me.
Kevin Parker
P: 0418 815 527
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Bill Gunshannon via
cctalk
Sent: Monday, 22 January 2018 02:23
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Apollo Software
Is there any interest or value in copies of SR7.0 "Aegis"
or should I just scratch them and add them to my other 8"
disks? (Yes, I used to have an Apollo in my house!! Made a great heater during those
long cold winters.)
bill
7:23 p.m.
A fair amount of Apollo software doc can be found at:
http://bitsavers.org/pdf/apollo/
I have other stuff that they probably don't have (yet),
I just fired off a note to Al Kossow, and I expect that QIC tape images
I have will end up on bitsavers.org/bits before too long. Things like
Aegis SR 9.7, Domain/OS up to SR 10.4.1, Compilers, DPCE, NFS, Ethernet
card drivers, Omniback, and the like.
I also have the means to image 8" floppies of most any format (using my
Catweasel) though it has been a wee while since I have done so.
JRJ
On 1/21/2018 7:59 PM, Kevin Parker via cctalk wrote:
Definitely interested here Bill - I've got 3
Apollos from a rescue - have the machines and all the token ring gear but no manuals
or software - as yet have to fire them up but anything Aegis related is of interest to
me.
Kevin Parker
P: 0418 815 527
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Bill Gunshannon via
cctalk
Sent: Monday, 22 January 2018 02:23
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Apollo Software
Is there any interest or value in copies of SR7.0 "Aegis"
or should I just scratch them and add them to my other 8"
disks? (Yes, I used to have an Apollo in my house!! Made a great heater during those
long cold winters.)
bill
2524
days inactive
2527
days old
13 comments
8 participants
participants (8)
-
aek＠bitsavers.org -
bill.gunshannon＠hotmail.com -
cube1＠charter.net -
davidkcollins2＠gmail.com -
derschjo＠gmail.com -
paulkoning＠comcast.net -
toby＠telegraphics.com.au -
trash80＠internode.on.net