I've had decent results with the ADAPTEC 4070's
too. What I'm mainly
interested in is having a boxed drive, in this case, complete with bridge
controller, which moves from system to system, as I do with my native SCSI
drives. Unfortunately, there aren't any MFM/RLL drives big enough to be
interesting.
Someone should correct me if I'm wrong (I'd be interested in knowing that
I'm wrong!), but the largest capacity MFM geometry is that of the Maxtor
XT2190 (1024 cylinders * 15 heads), giving you just under 150 Mbytes (M=10**6)
after formatting at 19 sectors/track. And the RLL version gets
another 30% or so of capacity.
Hitachi ESDI drives are available up to 1.5Gbytes or so, and work well on
Emulex ESDI<->SCSI controller.
All the above was assuming you meant size=capacity. If you meant
size=cubic feet or pounds, I'm sure you could put a 14" CDC SMD drive
on the other side of a SMD<->SCSI controller.
Of course, large embedded-controller SCSI drives are readily available on the
surplus market these days. 9 Gbyte drives start below $150.00, and
2 Gbyte drives seem to get around $40.
--
Tim Shoppa Email: shoppa(a)trailing-edge.com
Trailing Edge Technology WWW:
http://www.trailing-edge.com/
7328 Bradley Blvd Voice: 301-767-5917
Bethesda, MD, USA 20817 Fax: 301-767-5927