I have a couple of CS/80 HPIB disk drives and I am
curious how they are
controlled and would like to read the CS/80 programming manual if I can
find one.
The drives I have are a 9133H which is a combo 20MB hard drive and floppy
drive unit which I have used with my HP IPC, and a 2203A which is a
whopping 670MB dual disk unit which I haven't hooked up to anything yet.
Was that the biggest CS/80 HPIB drive HP ever made? Some day I'll try
interfacing one of the drives to the HP 2117F box I have if I can ever
figure out how to get it to power up.
Glen,
Earlier this year I wrote a primitive driver so that my HP1000's could talk
to CS/80 drives. Even with the CS80 docs it took weeks of tinkering to make
the damned thing work.
The CS80 protocol really isn't that difficult. All you need is a HPIB
protocol analyzer (Joe has one) and some patience. I can help you get
started with the command sequences. Getting the HP1000 to to send all the
correct sequences is a much larger problem.
I never finished the project but, I can do some basic disk functions. I can
boot from the 1000, I can read an write absolute sectors, and I can run
progrmas from the disk. This in itself is a major accomlishment.
If you need any help getting started, just let me know.
See ya,
SteveRob
_________________________________________________________________
Send and receive Hotmail on your mobile device:
http://mobile.msn.com