I believe it should be closest to the CPU (slot 3, console interface
goes to slot 4). I don't think the card uses the NPR signal, so the
jumper can stay in.
On Fri, Sep 5, 2014 at 8:05 PM, Roe Peterson <roeapeterson at gmail.com> wrote:
I'm helping a friend resurrect an 11/34. Unlike
my 34a, it requires an M8264 no-sack timeout board.
Two questions. Does the board need to be at the end of the bus? And, does it need a
slot with the NPR jumper removed?
Thanks. This machine is an old friend, and it is nearly running again after many years.