On Mar 29 2005, 15:47, Heinz Wolter wrote: One more thought... some of the manuals say to set the drive to DS3. With an M9058 it shouldn't matter; the drive selects are all tied together on each of J1, J2, J3, J4, each of which is fed by a separate drive select from J12 (the 50-way connection to the RQDX3). For example, J1-26 is fed from J12-30, which is DrvSel.3. Except that there's a removable link for each connector, between DS0 (pin 26) and DS1/2/3 (pins 28/30/32 - DS1/2/3 are hardwired together); make sure that link hasn't been removed. -- Pete Peter Turnbull Network Manager University of York