On 2015-01-26 15:11, Noel Chiappa wrote:
From: Johnny
Billquist
You are supposed to remove the two tiny screws
that holds the slide to
the drive when you remove it.
Yeah, that seems to be the conclusion.
What's odd is that RL0x's use almost identical (maybe they are identical)
slides, but on the RLOx's, there _is_ (I think) a way to take the drive out
without undoing screws; there's a little latch at the very front of the
slide, and it looks like if one trips that latch, the rail along the side of
the drive case will slide out out of the slides.
If that was the case, then the previous user was sloppy. In addition to
that latch, you are also supposed to screw in four (I think it is)
screws from the rail to the drive there too.
I wonder why they didn't do that on the RA8x's
as well? Maybe because those
weigh so much more?
They should all be screwed... The latch is just an extra safety feature
of the RL rail since it's so easy for it to come off the rails when the
screws are out...
Johnny