I am looking for a few things: I recently picked up an iSeries 270 and an AS/400 Model 200. A terminal and an 8-port Twinax hub were included, but not the cable to connect the terminal to the hub. The terminal has a "Y" cable with a DA15 and two female Twinax connectors. The connectors on the hub are also female, so I think that what I need is an M-M Twinax cable. I'm not sure if a terminator is required for the un-connected Twinax connector on the "Y" cable or not (I'm not really very familiar with AS/400s). I have an AlphaServer 1000A 4/266 which is missing the terminator for the internal SCSI backplane (because this is missing, the SCSI drives sometimes stop responding and cause the system to hang). It is also missing the cable to connect the two sections of the backplane. Does anybody have either of these? I have a DEC 3000/300X that no longer boots. The diagnostic LEDs show "FA", which represents a memory test failure. I think that one of the SIMM slots is damaged. When I got it, it would only boot after I removed and re-installed the SIMMs. I tried cleaning the SIMMs and slots with 99% alcohol, so I don't think that dirty contacts are a problem. I think that replacing the motherboard would fix the problem. I am also looking for an RS/6000 (preferably one with PCI rather than MCA). Does anybody have one that they want to get rid of for free or cheap?