23 Feb
2007
23 Feb
'07
8:15 a.m.
Hi,
I'm in need of a PET-style IEEE cable to connect an 8032 to its
peripherals. Anyone have one they're willing to part with?
This is the kind with the card edge connector on one end, and the
more traditional centronics-style IEEE connector on the other.
Thanks,
De
23 Feb
23 Feb
3:02 p.m.
Hi,
I'm in need of a PET-style IEEE cable to connect an 8032 to its
peripherals. Anyone have one they're willing to part with?
This is the kind with the card edge connector on one end, and the
more traditional centronics-style IEEE connector on the other.
When I needed one of these for my P500, I ended up making a little
adapter with an edge conenctor on one end (it's 0.156" spacing, I think
Digitkey sell them) and a 24 pin microribbon connector on the other. The
most difficult part was getting the jackposts to take the locking screws
of the normal IEEE-488 cables, they seem to be unobtainable in the UK. I
had to make those too...
-tony
6557
days inactive
6557
days old
1 comments
2 participants
participants (2)
-
ard＠p850ug1.demon.co.uk -
drb＠msu.edu