Jules,
No - go ahead and remove. The battery retains the PRAM data, which is
generally not a user-accessible feature in the way CMOS RAM is on x86. The
PRAM will be restored on next boot - but obviously, some things (like
virtual memory) will need to be re-enabled. Not a big deal at all.
On Sun, Nov 6, 2016 at 8:12 PM, John Rollins <kd7bcy at kd7bcy.com> wrote:
You just made me think that I need to go check on some
of my stuff and see
what the batteries are doing? Been quite a while since I used a lot of them.
On an old Mac, quite often the reason for a machine to not boot at all
would be a dead PRAM battery, so complete removal may not be an option. You
could test it, but don?t expect much. As for what is stored in there
besides date/time, a quick search shows that it is likely storing data on
startup disk ID, AppleTalk status, monitor settings, volume, mouse speed,
and energy saver settings.
On Nov 6, 2016, at 14:49 , Jules Richardson <
jules.richardson99 at gmail.com> wrote:
So I'm working my way (more slowly than I probably should be) through my
systems, ditching ancient on-board batteries before they leak...
In the case of the Mac SE's, are there any critical settings which I
should
make a note of before removing the on-board battery? Should I expect
any issues trying to run the machines without? (I'm not inclined to replace
batteries unless I have to, just so I don't have to worry about replacement
again in x years time)
cheers
Jules