1 Jun
2007
1 Jun
'07
8:28 a.m.
Sounds like a good idea. How do I do that?
Rod
-----Original Message-----
From: cctech-bounces at classiccmp.org
[mailto:cctech-bounces at classiccmp.org] On Behalf Of Sridhar Ayengar
Sent: 01 June 2007 01:22
To: On-Topic and Off-Topic Posts
Subject: Re: Bringing the VAX 4000-300 back to life.
Rod Smallwood wrote:
Boot er no but as it seems as the system spent some or
all of its life
in the insurance industry I'm not surprised the
disks have been wiped.
Ok so next move. I'm going to try and make a VMS 6.2 bootable tape on
the -200 as the -300 has a TK70.
They both have ethernet, why don't you just boot the 300 from the 200
using MOP?
Peace... Sridhar
1 Jun
1 Jun
5:42 p.m.
Rod Smallwood wrote:
Sounds like a good idea. How do I do that?
You configure the 4000-200 into a cluster (of one).
Then you tell it that it will have the VAX 4000-300
as a LAVC cluster member. Then boot the VAX 4000-300
into the cluster. Then proceed as I outlined
previously.
Antonio
2 Jun
2 Jun
12:36 a.m.
arcarlini at iee.org wrote:
Rod Smallwood wrote:
And if you want to know how to do that, per se, RTFM at:
http://h71000.www7.hp.com/doc/os73_index.html
Much of the v7.3 documentation there applies fairly well to older versions.
Peace... Sridhar
Sounds like a good idea. How do I do that?
You configure the 4000-200 into a cluster (of one).
Then you tell it that it will have the VAX 4000-300
as a LAVC cluster member. Then boot the VAX 4000-300
into the cluster. Then proceed as I outlined
previously.
6198
days inactive
6198
days old
2 comments
3 participants
participants (3)
-
arcarlini＠iee.org -
ploopster＠gmail.com -
RodSmallwood＠mail.ediconsulting.co.uk