On 12/24/2005 at 1:35 PM Richard A. Cini wrote: Old floppy write-protect/enable tabs work pretty well, as do "peelable/removable" labels. You can usually get the latter in a selection of colors. Here's an example of some: http://www.avery.com/us/Main?action=product.HierarchyList&node=10211291… logcode=WEB01 Cheers, Chuck

----- Original Message ----- From: "Richard A. Cini" <rcini at optonline.net> To: "'General Discussion: On-Topic and Off-Topic Posts'" <cctalk at classiccmp.org> Sent: Sunday, December 25, 2005 5:35 AM Subject: EPROM labels I use the write protect tabs of 5.25" disks. Generally, the "metallic" ones are less sticky than the plastic/tape ones. cheers, Lance // http://landover.no-ip.com Classic machines, classic software //

Hi, Rich, *********** REPLY SEPARATOR *********** On 24-Dec-05 at 13:35 Richard A. Cini wrote: If you can find one of the older Brady label printers on greed-bay, such as the LS2000 or similar, there are very suitable labels available through any Brady distributor (Graybar Electric is a good example) for EPROMs and other electronic usage. Another workable alternative is one of the generic thermal-transfer printers, such as the Brother or Casio units widely sold by Office Despot. I've found that the half-inch black-on-white tape works great on standard-size EPROMs, while the quarter-inch tape is suitable for skinnier ICs such as PROMs or PALs. Happy hunting. -=-=-=-=-=-=-=-=-=-=-=- Bruce Lane, Owner & Head Hardware Heavy, Blue Feather Technologies -- http://www.bluefeathertech.com kyrrin (at) bluefeathertech do/t c=o=m "If Salvador Dali had owned a computer, would it have been equipped with surreal ports?"